HFBR-0600Z Datasheet, PDF(1/6 Page) AVAGO TECHNOLOGIES LIMITED – SERCOS Fiber Optic Transmitters and Receivers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

HFBR-0600Z Datasheet, PDF (1/6 Pages) AVAGO TECHNOLOGIES LIMITED – SERCOS Fiber Optic Transmitters and Receivers

HFBR-0600Z Series

SERCOS Fiber Optic Transmitters and Receivers

Data Sheet

SERCOS

SERCOS is a Serial Realtime Communication System, a

standard digital interface for communication between

controls and drives for numerically controlled machines.

The SERCOS interface specification was written by a joint

working group of the VDW (German Machine Tool Builders

Association) and ZVEI (German Electrical and Electronic

Manufacturerâs Association) to allow data exchange

between NC controls and drives via fiber optic rings, with

isolation and noise immunity. The HFBR-0600Z family

of fiber optic transmitters and receivers comply to the

SERCOS specifications for transmitter and receiver optical

characteristics and connector style (SMA).

Description

The HFBR-0600Z components are capable of operation at

symbol rates from DC to over 2 MBd and distances from

0 to over 20 metres. The HFBR-1602Z and HFBR-1604Z

transmitters contain a 655 nm AlGaAs emitter capable of

efficiently launching optical power into 1000 mm plastic

optical fiber. The optical output is specified at the end of

0.5 m of plastic optical fiber.

The HFBR-1604Z is a selected version of the HFBR-1602,

with power specified to meet the SERCOS high attenua-

tion specifications.

The HFBR-2602Z receiver incorporates an integrated

photo IC containing a photodetector and DC amplifier

driving an open-collector Schottky output transistor. The

HFBR-2602Z is designed for direct interfacing to popular

logic families. The absence of an internal pullup resistor

allows the open-collector output to be used with logic

families such as CMOS requiring voltage excursions higher

than VCC. The HFBR-2602Z has a dynamic range of 15 dB.

Features

ï·ï ï Fully compliant to SERCOS optical specifications

ï·ï ï Optimized for 1 mm plastic optical fiber

ï·ï ï Compatible with SMA connectors

ï·ï ï Auto-insertable and wave solderable

ï·ï ï Data transmission at symbol rates from DC to over

2 MBd for distances from 0 to over 20 metres

Applications

ï·ï ï Industrial control data links

ï·ï ï Reduction of lightning and voltage transient suscep-

tibility

ï·ï ï Tempest-secure data processing equipment

ï·ï ï Isolation in test and measurement instruments

ï·ï ï Robotics communication

CAUTION: The small junction sizes inherent to the design of this component increase the component's susceptibility

to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and

assembly of this component to prevent damage and/or degradation which may be induced by ESD.

▷