HDJD-S831-QT333 Datasheet, PDF (1/10 Pages) Agilent(Hewlett-Packard) – Color Sensor Module

HDJD-S831-QT333
Color Sensor Module
Data Sheet
Description
Avago Color Sensor is a high performance, small in
size, cost effective light to voltage converting sensor.
The sensor combines a photodiode array and three
trans-impedance amplifiers in a single monolithic
CMOS IC solution. With Red (R), Green (G), and Blue
(B) color filters coated over the photodiode array,
the sensor converts RGB light to analog voltage
outputs, denoted by VR_OUT, VG_OUT and VB_OUT,
respectively. The sensor is driven by a single 5 V
supply and incorporates an internal 5 V to 3.3 V
voltage regulator. The color sensor module consists
of a color sensor packaged in a 5 x 5 x 2 [mm] surface
mount QFN-16, flat flexible cable connector and a
decoupling capacitor mounted on a PCB.
Features
• Converts light to R,G,B voltage output
• Monolithic CMOS IC solution with integrated R,G,B color
filter, photodiode array, trans-impedance amplifier in
one chip
• 12x12 photodiode array design minimizes the effect of
contamination and optical aperture misalignment
• Spectral sensitivity response optimized for RGB-LED
backlight application: good detection capability in light
chromaticity drift
• Small module size (27.6 mm x 7 mm x 3 mm)
• Internal 5 V to 3.3 V voltage regulator
Applications
Avago Color Sensor is ideal for open-loop color
identification and closed-loop color point control.
The spectral sensitivity response of the sensor is
optimized for RGB-LED backlight applications. The
sensor has good detection ability in light output
chromaticity drift, when used with closed-loop
feedback controller, manages to bring the backlight
system to realize good du’v’ performance. Potential
applications include white point control in emissive
display, environmental lighting, color control in
industrial processes, and many more.