HDJD-S722-QR999 Datasheet, PDF (1/10 Pages) AVAGO TECHNOLOGIES LIMITED – Color Sensor

HDJD-S722-QR999
Color Sensor
Data Sheet
Description
Avago Technologies’ color sensor is a high performance,
small in size, cost effective light to voltage converting
sensor. The sensor combines a photodiode array and
three trans-impedance amplifiers in a single monolithic
CMOS IC solution. With a Red (R), Green (G) and Blue
(B) color filters coated over the photodiode array, the
sensor converts R, G, B light to analog voltage outputs,
denoted by VR_OUT, VG_OUT and VB_OUT, respectively.
The sensor is packaged in a 5x5x1 (mm) surface mount
QFN-16 package.
Applications
Avago Technologies’ color sensor is ideal for open-loop
color identification and closed-loop color point control.
The sensor is designed for low illuminance applica-
tions including color detection, environmental lighting,
industrial process, etc. With R, G, B photo-sensor and
amplifier integrated in a single 5x5x1 (mm) package,
Avago Technologies’ color sensor provides a high per-
formance, small in size and cost effective solution
to color sensing.
Features
• Convert light to R, G, B voltage output
• Monolithic CMOS IC solution with integrated R, G,
B color filter, photodiode array, trans-impedance
amplifier in one chip
• 3 sets of 3x3 photodiode array design minimize
the effect of contamination and optical aperture
misalignment
• Small in size 5x 5x1 mm
• Independent gain selection options for each R, G, B
channel
ESD WARNING: Standard CMOS handling precautions should be observed to avoid static discharge.
AVAGO TECHNOLOGIES’ PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE AS
PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY
OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS
AGAINST AVAGO TECHNOLOGIES OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.