HCPL-M600 Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Small Outline, 5 Lead, High CMR, High Speed, Logic Gate Optocouplers

HCPL-M600, HCPL-M601, HCPL-M611
Small Outline, 5 Lead, High CMR,
High Speed, Logic Gate Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These small outline high CMR, high speed, logic gate
optocouplers are single channel devices in a five lead
miniature footprint. They are electrically equivalent to
the following Avago optocouplers (except there is no
output enable feature):
SO-5 Package
HCPL-M600
HCPL-M601
HCPL-M611
Standard DIP
6N137
HCPL-2601
HCPL-2611
SO-8 Package
HCPL-0600
HCPL-0601
HCPL-0611
The SO-5 JEDEC registered (MO-155) package outline
does not require “through holes” in a PCB. This package
occupies approximately one fourth the footprint area of
the standard dual-in-line package. The lead profile is de-
signed to be compatible with standard surface mount
processes.
The HCPL-M600/01/11 optically coupled gates combine
a GaAsP light emitting diode and an integrated high
gain photon detector. The output of the detector I.C.
is an Open-collector Schottky-clamped transistor. The
internal shield provides a guaranteed common mode
transient immunity specification of 5,000 V/μs for the
HCPL-M601, and 10,000 V/μs for the HCPL-M611.
This unique design provides maximum ac and dc circuit
isolation while achieving TTL compatibility. The optocou-
pler ac and dc operational param eters are guaranteed from
–40°C to 85°C allowing trouble free system performance.
Features
x Surface Mountable
x Very Small, Low Profile JEDEC Registered Package
Outline
x Compatible with Infrared Vapor Phase Reflow and
Wave Soldering Processes
x Internal Shield for High Common Mode Rejection (CMR)
HCPL-M601: 10,000 V/μs at V_CM = 50 V
HCPL-M611: 15,000 V/μs at V_CM = 1000 V
x High Speed: 10 Mbd
x LSTTL/TTL Compatible
x Low Input Current Capability: 5 mA
x Guaranteed ac and dc Performance over Temperature:
–40°C to 85°C
x Safety and regulatory approvals:
- UL recognized: 3750 Vac for 1 min. per U.L.
(File No. 55361)
- CSA component acceptance Notice #5
- IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/
M611 Option 060.
x Lead Free Option
Applications
x Isolated Line Receiver
x Simplex/Multiplex Data Transmission
x Computer-Peripheral Interface
x Microprocessor System Interface
x Digital Isolation for A/D, D/A Conversion
x Switching Power Supply
x Instrument Input/Output Isolation
x Ground Loop Elimination
x Pulse Transformer Replacement
CAUTION: The small device geometries inherent to the design of this bipolar component increase the component's
susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in
handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.