|
HCPL-3180-000E Datasheet, PDF (1/16 Pages) AVAGO TECHNOLOGIES LIMITED – 2.5 Amp Output Current, High Speed, Gate Drive Optocoupler | |||
|
HCPL-3180
2.5 Amp Output Current, High Speed, Gate Drive Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
This family of devices consists of a GaAsP LED. The LED
is optically coupled to an integrated circuit with a power
stage. These optocouplers are ideally suited for high
frequency driving of power IGBTs and MOSFETs used in
Plasma Display Panels, high performance DC/DC convert-
ers, and motor control inverter applications.
Functional Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 VCC
7 VO
6 VO
5 VEE
Features
⢠2.5 A maximum peak output current
⢠2.0 A minimum peak output current
⢠250 kHz maximum switching speed
⢠High speed response: 200 ns maximum propagation delay over
temperature range
⢠10 kV/µs minimum Common Mode Rejection (CMR) at VCM=
1500 V
⢠Under Voltage Lock-Out protection (UVLO) with hysteresis
⢠Wide operating temperature range:â40°C to 100°C
⢠Wide VCC operating range: 10 V to 20 V
⢠20 ns typical pulse width distortion
⢠Safety approvals:
â UL approval, 3750 Vrms for 1 minute
â CSA approval
â IEC/EN/DIN EN 60747-5-2 approval
A 0.1 µF bypass capacitor must be con-
nected between pins VCC and Ground.
Applications
⢠Plasma Display Panel (PDP)
⢠Distributed Power Architecture (DPA)
⢠Switch Mode Rectifier (SMR)
⢠High performance DC/DC converter
⢠High performance Switching Power Supply (SPS)
⢠High performance Uninterruptible Power Supply (UPS)
⢠Isolated IGBT/Power MOSFET gate drive
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation, which may be induced by ESD.
|
▷ |