|
HCPL-270L Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – Low Input Current, High Gain, LVTTL/LVCMOS Compatbie Optocouplers | |||
|
HCPL-270L/070L/273L/073L
Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers
Data Sheet
Description
These high gain series couplers use a Light Emitting Di-
ode and an integrated high gain photodetector to pro-
vide extremely high current transfer ratio between input
and output. Separate pins for the photodiode and out-
put stage result in LVTTL compatible saturation voltages
and high speed operation. Where desired, the VCC and VO
terminals may be tied together to achieve conventional
photo-darlington operation. A base access terminal al-
lows a gain bandwidth adjustment to be made.
These optocouplers are for use in LVTTL/LVCMOS or
other low power applications. A 400% minimum current
transfer ratio is guaranteed over 0 to +70ËC operating
range for only 0.5 mA of LED current.
The HCPL-070L and HCPL-073L are surface mount de-
vices packaged in an industry standard SOIC-8 footprint.
The SOIC-8 does not require "through holes" in a PCB.
This package occupies approximately one-third the foot-
print area of the standard dual-in-line package. The lead
profile is designed to be compatible with standard sur-
face mount processes.
Functional Diagram
Features
⢠3.3V/5V Dual Supply Voltages
⢠Low power consumption
⢠High current transfer ratio
⢠Low input current requirements â 0.5 mA
⢠LVTTL/LVCMOS compatible output
⢠Performance guaranteed over temperature 0°C to +70°C
⢠Base access allows gain bandwidth adjustment
⢠High output current â 60 mA
⢠Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSA
Applications
⢠Ground isolate most logic families â LVTTL/LVCMOS
⢠Low input current line receiver
⢠High voltage insulation
⢠EIA RS-232C line receiver
⢠Telephone ring detector
⢠V AC line voltage status indicator â low input power
dissipation
⢠Low power systems â ground isolation
NC 1
HCPL-270L/070L
8 VCC
ANODE 2
7 VB
CATHODE 3
6 VO
NC 4
5 GND
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
HCPL-273L/073L
8 VCC
7 VO1
6 VO2
5 GND
TRUTH TABLE
LED
VO
ON
LOW
OFF
HIGH
SHIELD
A 0.1 µF bypass capacitor connected between pins 8 and 5 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
|
▷ |