HCPL-261A_13 Datasheet, PDF (1/17 Pages) AVAGO TECHNOLOGIES LIMITED – HCMOS Compatible, High CMR, 10 MBd Optocouplers High speed: 10 MBd typical

HCPL-261A, HCPL-061A, HCPL-263A, HCPL-063A
HCPL-261N, HCPL-061N, HCPL-263N, HCPL-063N
HCMOS Compatible, High CMR, 10 MBd Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCPL-261A family of optically coupled gates shown
on this data sheet provide all the benefits of the in-
dustry standard 6N137 family with the added benefit
of HCMOS compatible input cur­rent. This allows direct
interface to all common circuit topologies without
additional LED buffer or drive components. The Al-
GaAs LED used allows lower drive currents and reduc-
• HCMOS/LSTTL/TTL performance compatible
• 1000 V/µs minimum Common Mode Rejection (CMR)
at V_CM = 50 V (HCPL-261A family) and 15 kV/µs
minimum CMR at V_CM = 1000 V (HCPL-261N family)
• High speed: 10 MBd typical
• AC and DC performance specified over industrial
es degradation by using the latest LED tech­nolo­ gy. On
temperature range -40°C to +85°C
the single channel parts, an enable output allows the de-
tector to be strobed. The output of the detector IC is an
open collector schottky-clamped transistor. The internal
shield provides a mini­mum common mode transient im-
munity of 1000 V/µs for the HCPL-261A family and 15000
V/µs for the HCPL-261N family.
• Available in 8 pin DIP, SOIC-8 packages
• Safety approval:
– UL recognized per UL1577 3750 Vrms for 1 minute
and 5000 V_rms for 1 minute (Option 020)
– CSA Approved
Functional Diagram
HCPL-261A/261N
HCPL-061A/061N
NC 1
8 VCC
– IEC/EN/DIN EN 60747-5-5 approved
HCPL-263A/263N
Applications
HCPL-063A/063N
• Low input current (3.0 mA) HCMOS compatible
ANODE ₁ 1
8 VCC _{version of 6N137 optocoupler}
ANODE 2
7 V_E
CATHODE ₁ 2
7 VO1 _{• Isolated line receiver}
CATHODE 3
6 VO
CATHODE ₂ 3
6 VO2 _{• Simplex/multiplex data transmission}
NC 4 _SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
ON
OFF
ON
OFF
ENABLE
H
H
L
L
NC
NC
OUTPUT
L
H
H
H
L
H
ANODE ₂
4
SHIELD
5
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
OUTPUT
L
H
GND _•
•
•
•
•
Computer-peripheral interface
Digital isolation for A/D, D/A conversion
Switching power supplies
Instrumentation input/output isolation
Ground loop elimination
• Pulse transformer replacement
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is
required.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.