CNY17-000E Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – Phototransistor Optocoupler High Collector-Emitter Voltage Type

CNY17-x
Phototransistor Optocoupler High Collector-Emitter
Voltage Type
Data Sheet
Description
The CNY17 contains a light emitting diode opti-
cally coupled to a photo-transistor. It is packaged in a
6-pin DIP package and available in wide-lead spacing
option and lead bend SMD option. Collector-emitter
voltage is above 70 V. Response time, t_r, is typically
5 µs and minimum CTR is 40% at input current of
10 mA.
Applications
• System appliances, measuring instruments
• Signal transmission between circuits of different
potentials and impedances
• Feedback circuit in power supply
Functional Diagram
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
6
5
4
Features
• High collector-emitter voltage
(V_CEO = 70 V)
• High input-output isolation voltage
(V_iso = 5000 Vrms)
• Current Transfer Ratio
(CTR: min. 40% at I_F = 10 mA, V_CE = 5 V)
• Response time
(t_r: typ., 5 µs at V_CC = 10 V, I_C = 2 mA, R_L = 100 Ω)
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:
–Leads with 0.4" (10.16 mm) spacing (W00)
–Leads bend for surface mounting (300)
–Tape and reel for SMD (500)
–IEC/EN/DIN EN 60747-5-2 approvals (060)
Schematic
1
2
3
1. ANODE
2. CATHODE
3. NC
4. EMITTER
5. COLLECTOR
6. BASE
1 ^IF
ANODE
+
V_F
–
CATHODE
2
6
BASE
I_{C 5}
COLLECTOR
4
EMITTER
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.