AVSP-1104 Datasheet, PDF (1/2 Pages) AVAGO TECHNOLOGIES LIMITED – 10:4 Gearbox 100G Ethernet/OTN PHY IC for Backplane, Portside and Cable

Vortex Gearbox™ AVSP-1104
10:4 Gearbox 100G Ethernet/OTN PHY IC
for Backplane, Portside and Cable
Product Brief
Introduction
The first product of Avago's Vortex Gearbox^TM family, the AVSP-1104 offers data center, enterprise and OTN switch and
router manufacturers the longest reach solution for both backplane and portside applications. A 100G Ethernet PHY
IC, the device features Avago's proven 28 nm CMOS SerDes technology, including Avago's unique Decision Feedback
Equalization (DFE) architecture, providing low overall power consumption, low data latency, and best-in-class jitter and
crosstalk performance.
To integrate hundreds of high-speed SerDes channels in a single ASIC, Avago has maintained a focus on minimizing
power while increasing data rates. Hence, the AVSP-1104 enables power-efficient 100G optical modules to increase
connection speeds from 10 Gbps to 100 Gbps for high performance and high bandwidth switching, routing and blade
server applications. All SerDes within the AVSP-1104 operate at any frequency (hole-free): four from 1 Gbps to 28 Gbps,
and ten from 1 Gbps to 15 Gbps. The latter perform full duplex conversion of ten lanes at 10/11 Gbps to four lanes of
25/28 Gbps. An additional six 15G transceivers can be accessed to use the AVSP-1104 in a 10:10 full duplex retimer mode.
The device supports the following standards:
• IEEE CAUI
• CEI 11G-SR and CEI 28G-VSR
• CEI 25G-LR
Backplane
10x10G
or Cable
10x10G
4x25G
4x25G
Switch
Fabric
Or ASIC
Vortex Gearbox™
AVSP-1104
Vortex Gearbox™
AVSP-1104
Switch
Fabric
Or ASIC
10:4 Gearbox
Figure 1. Typical 10:4 Gearbox Application Diagram
10:4 Gearbox