AV02-0744EN Datasheet, PDF (1/5 Pages) AVAGO TECHNOLOGIES LIMITED – The 4-pin MOST Optical Receiver (ODIN MIR4 02)

ODIN MIR4 02
Fiber Optic Receiver for MOST®
Data Sheet
Description
The 4-pin MOST Optical Receiver (ODIN MIR4 02) is a
highly integrated CMOS IC combined with a high speed
PIN diode designed to receive up to 25 Mbit/s optical
data which is biphase coded (up to 50 Mbaud) and
convert this optical data to a rail-to-rail data stream.
During the low power mode, the PIN diode is still being
observed and if activity is detected, the receiver will
switch to full power mode. A STATUS-pin indicates if
modulated light is received (Light on -> STATUS = low).
With the STATUS-pin the power supply of the whole
MOST device can be switched ON. The power supply
voltage is either 3.3V or 5V.
Applications
• Optical Receiver for MOST Systems
Features
Excellent solution for converting high speed data from
Plastic Optical Fiber (POF) to digital output.
• Operating @ 3.3V or 5V Power Supply
• High speed receiver up to 25 Mbit/s net data rate (50
MBaud)
• 95°C operating temperature over whole life time
• Photo current sensing, network activity detection and
Low Power Mode (I_CC < 10 µA)
• Signal detect and Status Output
• Low power consumption
• Pulse width control
• -25dBm guaranteed sensitivity @ 650nm for working
in a low attenuation range of PMMA Fiber
• Fully compliant to “MOST® Specification of Physical
Layer Rev 1.1”
• RoHS compliant (Lead free and halogen free)