ASSR-1410-003E Datasheet, PDF (1/15 Pages) AVAGO TECHNOLOGIES LIMITED – General Purpose, Form A, Solid State Relay (Photo MOSFET)

ASSR-1410, ASSR-1411 and ASSR-1420
General Purpose, Form A, Solid State Relay (Photo MOSFET)
(60V/0.6A/1Ω)
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ASSR-14XX Series consists of an AlGaAs infrared
light-emitting diode (LED) input stage optically cou-
pled to a high-voltage output detector circuit. The
detector consists of a high-speed photovoltaic diode
array and driver circuitry to switch on/off two discrete
high voltage MOSFETs. The relay turns on (contact
closes) with a minimum input current of 3mA through
the input LED. The relay turns off (contact opens) with
an input voltage of 0.8V or less.
The single channel configurations, ASSR-1410 and
ASSR-1411, are equivalent to 1 Form A Electromechani-
cal Relays (EMR), and the dual channel configuration,
ASSR-1420, is equivalent to 2 Form A EMR. They are
available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull
Wing Surface Mount for DIP packages. Their electrical
and switching characteristics are specified over the
temperature range of -40°C to +85°C. They are used for
general purpose switching of signals and low power
AC/DC loads.
ASSR-1411 enables AC/DC and DC-only output connec­
tions. For DC-only connection, the output current, Io,
increases to 1.2A and the on-resistance, R_(ON) reduces
to 0.5W.
Functional Diagram
Opto-isolation
1
4 Truth Table
LED Output
Off Open
On Close
2
3
Features
• Compact Solid-State Bi-directional Signal Switch
• Single and Dual Channel Normally-off Single-Pole-
Single-Throw (SPST) Relay
• 60V Output Withstand Voltage
• 0.6A or 1.2A Current Rating
(See Schematic for ASSR-1411 Connection A and B)
• Low Input Current: CMOS Compatibility
• Low On-Resistance:
0.2 Ω Typical for DC-only,
0.7 Ω Typical for AC/DC
• Very High Output Off-state Impedance:
10 Teraohms Typical
• High Speed Switching:
0.1ms (Ton), 0.02ms (Toff ) Typical
• High Transient Immunity: >1kV/µs
• High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals)
- 3750 Vrms for 1 min per UL1577
- CSA Component Acceptance
Applications
• �T�e�le��co��m�m��u�n�i�c�a�t�io�n��S�w�i�t�c�h�in�g�
• �D�a�t�a�C�o��m�m��u�n�i�ca�t�i�o�n�s
• �I�n�d��u�s�t�ri�a�l�C��o�n�t�r�o�l�s
• �M��e�d�ic�a�l
• �S�e�c�u�r�i�ty�
• �E�M��R�/��R�e�e�d��R�e�la�y��R�e�p�l�a�c�e�m��e�n�t
Single Channel, SPST Relay,
1 Form A in 4-Pin SO Package
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.