ASMT-FG10-NFJ00 Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – Surface Mount AF Lamp

ASMT-FG10-NFJ00
Surface Mount AF Lamp
Data Sheet
Description
Features
Avago Technologies ASMT-FG10-NFJ00 is a SMT (Surface
Mount Technology) dome lamp uses an untinted, nondif-
fused lens to provide a high luminous intensity within a
narrow radiation pattern. The device is made by encap-
sulating LED chip on axial lead frame to form molded
epoxy lamp package with 6 bended leads for surfacing
mounting.
This lamp type LED utilizes Indium Gallium Nitrate
(InGaN) material technology. The InGaN material has a
very high luminous efficiency, capable of producing high
light output over a wide range of drive currents. The color
available for this SMT Lamp package is 530nm Green.
This narrow angle SMT lamp package is designed for ap-
plications that require long distance illumination and
narrow beam pattern such as auxiliary flash for auto-
focus function in digital still camera etc. In order to facili-
tate pick and place operation, this SMT Lamp is shipped
in tape and reel, with 1000 units per reel.
This package is compatible with Pb-free 2x reflow
soldering process.
• Smooth, Consistent Narrow Radiation Pattern
• 6° View Angle
• 4.8 L x 4.8 X 5.33H mm Package Dimension
• Good Intensity Output
• Compatible with 2x Solder Reflow
• Available in 16mm tape on 15inch (380mm) Diameter
reels
• Clear, Non-diffused Epoxy
• RoHS compliance
Applications
• Camera
Eye Safety
This LED is tested Class 1 to IEC/EN 60825-1 (2001) under
operation at 20mA. This LED is not recommended to drive
beyond 20mA as some of this LED might fall in the clas-
sification of Class 2M to IEC/EN 60825-1 (2001).
CAUTION: ASMT-FG10 LEDs are Class 1 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to AVAGO Application Note AN-1142 for additional details.