ASMB-BTE1-0B332 Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – High Brightness PLCC-4 Tricolor LED

ASMB-BTE1-0B332
High Brightness PLCC-4 Tricolor LED
Data Sheet
Description
This family of SMT LEDs are in PLCC-4 package, with com-
mon anode pin. The full black plastic housing with white
inner reflector provides good contrast without compro-
mising brightness. A wide viewing angle of 110° together
with the built-in reflector drives up the intensity of light
output making these LEDs suitable for use in interior elec-
tronics signs.
These LEDs are compatible with reflow soldering process.
For easy pick & place, the LEDs are shipped in tape and
reel. Every reel is shipped from a single intensity and color
bin except red color for better uniformity.
Features
• PLCC-4 package (Plastic Leaded Chip Carrier) with
common pin configuration
• LED package with diffused silicone encapsulation
• High brightness using AlInGaP and InGaN dice
technologies
• Typical viewing angle at 110°
• Compatible with reflow soldering process
• Good contrast with black body and diffused
encapsulation
• JEDEC MSL 3
Applications
• Indoor full color display
CAUTION: LEDs are ESD-sensitive. Please observe appropriate precautions during han-
dling and processing. Refer to Avago Application Note AN-1142 for additional details.