AMMP-6408_08 Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – 6 to 18 GHz 1 W Power Amplifier in SMT Package

AMMP-6408
6 to 18 GHz 1 W Power Amplifier
in SMT Package
Data Sheet
Description
The AMMP-6408 MMIC is a broadband 1W power
amplifier in a surface mount package designed for use
in transmitters that operate in various frequency bands
between 6 GHz and 18 GHz. At 8 GHz, it provides 29 dBm
of output power (P-1dB) and 20 dB of small-signal gain
from a small easy-to-use device. This MMIC optimized
for linear operation with an output third order intercept
point (OIP3) of 38 dBm.
Pin Connections (Top View)
1
2
3
8
4
Features
• 5 x 5 mm Surface Mount Package
• Wide frequency range 6-18 GHz
• Highly linear: OIP3 = 38 dBm
• Integrated RF power detector
• ESD protection (50 V MM, and 250 V HBM)
• Input port partially matched
(For narrowband applications, customer may obtain
optimum matching and gain with an additional
matching circuit.)
Specifications (Vd = 5 V, Idsq = 650 mA)
• Frequency range 6 to 18 GHz
• Small signal gain of 18 dB
• Return loss: input: -3 dB, Output: -9 dB
• High Power: @ 8 GHz, P-1dB = 29 dBm
7
6
5
PIN FUNCTION
1
Vgg
2
Vdd
3
DET_O
4
RF_out
5
DER_R
6
Vdd
7
Vgg
8
RF_in
PACKAGE
BASE
GND
Application
• Microwave radio systems
• Satellite VSAT, DBS Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband wireless access (including 802.16 and
802.20 WiMax)
• WLL and MMDS loops
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1A)
Refer to Avago Technologies Application Note A004R:
Electrostatic Discharge, Damage and Control.
Note: This MMIC uses depletionmode pHEMT devices.
Negative supply is used for the DC gate biasing.