AMMP-6333_15 Datasheet, PDF (1/9 Pages) AVAGO TECHNOLOGIES LIMITED – 18 – 33 GHz, 0.2 W Driver Amplifier in SMT Package

AMMP-6333
18 – 33 GHz, 0.2 W Driver Amplifier in SMT Package
Data Sheet
Description
Features
The AMMP-6333 is a broadband 0.2 W driver amplifier
designed for use in transmitters operating in various
frequency bands from 18 GHz to 33 GHz. This small, easy to
use device provides over 23 dBm of output power (P_-1dB)
and more than 20 dB of gain at 25 GHz. It was optimized
for linear operation with an output power at the third
order intercept point (OIP3) of 30dBm. The AMMP-6333
features a temperature compensated RF power detection
circuit that enables power detection sensitivity of 0.3 V/W
at 25GHz. It is fabricated using Avago Technologies unique
0.25μm E-mode PHEMT technology which eliminates the
need for negative gate biasing voltage.
Package Diagram
Vg Vd DET_O
1
2
3
• Frequency range: 18 to 33 GHz
• Small signal gain: 20 dB
• P-1dB : 23dBm
• Return Loss (In/Out): -10 dB
Applications
• Microwave Radio systems
• Satellite VSAT, Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access (including 802.16 and
802.20 WiMax)
• WLL and MMDS loops
Functional Block Diagram
RF IN 8
4 RF OUT
7
6
5
NC Vd DET_R
1
2
3
8
4
7
6
5
Pin Function
1
Vg
2
Vd
3 DET_O
4 RF_out
5
DET_R
6
Vd
7
NC
8
RF_in
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A) = 90 V
ESD Human Body Model (Class 1A) = 300 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Note: MSL Rating = Level 2A