AMMP-6233_15 Datasheet, PDF (1/6 Pages) AVAGO TECHNOLOGIES LIMITED – 18 to 32 GHz GaAs Low Noise Amplifier

AMMP-6233
18 to 32 GHz GaAs Low Noise Amplifier
Data Sheet
Description
Avago Technologies’ AMMP-6233 is a high gain, low-
noise amplifier that operates from 18 GHz to 32 GHz. It
has a 3 dB noise figure, over 20 dB of gain and designed
to be an easy-to-use drop-in with any surface mount
PCB application. Popular applications include micro-
wave radios, 802.16 and satellite VSAT or DBS receivers.
The fully integrated microwave circuit eliminated the
complex tuning and assembly processes typically re-
quired by hybrid (discrete-FET) amplifiers. The surface
mount package allows elimination of “chip & wire” as-
sembly for lower cost. The device has 50 Ω input and
output match and is unconditionally stable. The MMIC
has fully integrated input and output DC blocking ca-
pacitors and bias choke. The backside of the package
is both RF and DC ground that simplifies the assembly
process. It is fabricated in a PHEMT process to provide
exceptional low noise and gain performance.
Package Diagram
NC Vd NC
1
2
3
RF IN 8
4 RF OUT
7
6
5
NC NC NC
Features
• Surface Mount Package, 5.0 x 5.0 x 1.25 mm
• Integrated DC block and choke
• 50 Ω Input and Output Match
• Single Positive Supply Pin
• No Negative Gate Bias
Specifications (Vd=3.0V, Idd=65mA)
• Broadband RF from 18 to 32 GHz
• High Gain of 23dB
• Low Gain Flatness: ± 1dB
• Typical Noise Figure of 2.6 dB
• Typical OIP3 of 19dBm
Applications
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access
(including 802.16 and 802.20 WiMax)
• WLL and MMDS loops
Functional Block Diagram
123
765
Pin Function
1
2 Vdd
3
4 RFout
5
6
7
8 RFin
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A) = 50V
ESD Human Body Model (Class 0) = 200V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Note: MSL Rating = Level 2A