AMMP-6232 Datasheet, PDF (1/9 Pages) AVAGO TECHNOLOGIES LIMITED – 18 TO 32 GHZ GAAS HIGH LINEARITY LNA IN SMT PACKAGE

AMMP-6232
18 to 32 GHz GaAs High Linearity LNA in SMT Package
Data Sheet
Description
Avago’s AMMP-6232 is an easy-to-use broadband, high
gain, high linearity Low Noise Amplifier in a surface mount
package. The wide band and unconditionally stable
performance makes this MMIC ideal as a primary or sub-
sequential low noise block or a transmitter driver. The MMIC
has 4 gain stages and requires a 4V, 138mA power supply
for optimal performance. Since this MMIC covers several
bands, it can reduce part inventory and increase volume
purchase options The MMIC is fabricated using PHEMT
technology. The surface mount package eliminates the
need of “chip & wire” assembly for lower cost. This MMIC is
fully SMT compatible with backside grounding and I/Os.
Pin Connections (Top View)
123
100pF
8
100pF
7
6
5
Top view
Package base: GND
Pin Function
1
2
Vdd
3
4
4
RFout
5
6
Vg
7
8
RFin
Features
• Surface Mount Package, 5.0 x 5.0 x 1.25 mm
• Single Power Supply Pin
• Unconditionally Stable
• 50Ohm Input and Output Match
Specifications (Vdd = 4.0V, Idd = 138mA)
• RF Frequencies:18 - 32 GHz
• High Output IP3:29dBm
• High Small-Signal Gain: 23dB
• Typical Noise Figure: 3dB
Applications
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access
(including 802.16 and 802.20 WiMax)
• WLL and MMDS loops
• Commercial grade military
Note:
1. This MMIC uses depletion mode pHEMT devices.
2. Negative voltage is used for the gate bias
Attention:
Observe precautions for
handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1A)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control