AMMP-6130_15 Datasheet, PDF (1/5 Pages) AVAGO TECHNOLOGIES LIMITED – 30 GHz Power Amplifier with Frequency Multiplier

AMMP-6130
30 GHz Power Amplifier with Frequency Multiplier (x2)
in SMT Package
Data Sheet
Description
Avago Technologies AMMP-6130 is a high gain, narrow-
band doubler and output power amplifier designed for
DBS applications and other commercial communication
systems. The MMIC takes an input 15 GHz signal and
passes it through a harmonic frequency multiplier (x2)
and then three stages of power amplification. Integrated
matching structures filter and match input/output to
50 Ω. It has integrated input and output DC blocking
capacitors and bias structures to all stages. The MMIC is
fabricated using PHEMT technology. The backside of this
package part is both RF and DC ground. This helps sim-
ply the assembly process and reduces assembly related
performance variations and costs. The surface mount
package allows elimination of “chip & wire” assembly for
lower cost. This MMIC is a cost effective alternative to hy-
brid (discrete-FET) amplifiers that require complex tuning
and assembly process.
Package Diagram
NC Vdd NC
1
2
3
RF IN 8
4 RF OUT
7
6
5
NC NC NC
Features
• Surface Mount Package, 5.0 x 5.0 x 1.25 mm
• Integrated DC Block and Choke
• 50 Ω Input and Output Match
• Single Positive Supply Pin
• No Negative Gate Bias
Specifications (Vd=4.5V, Idd=200mA)
• Frequency Range 15GHz in, 30GHz out
• Output Power: 21 dBm
• Harmonic Suppression: 60dBc
• Single Positive Supply
• DC Requirements: 4.5V, 200mA
Applications
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• Broadband Wireless Access)
Functional Block Diagram
Pin Function
1
2
3
1
2 V_d
3
4
RF _Out
5
8
X2
4
6
7
8 RF _In
7
6
5
PACKAGE
BASE
GND
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 80V
ESD Human Body Model = 250V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Note: MSL Rating = Level 2A