AMMP-6130 Datasheet, PDF (1/8 Pages) AVAGO TECHNOLOGIES LIMITED – 30 GHz Power Amplifier with Frequency Multiplier (x2)

AMMP-6130
30 GHz Power Amplifier with Frequency Multiplier (x2)
in SMT Package
Data Sheet
Description
Avago Technologies AMMP-6130 is a high gain,
narrowband doubler and output power amplifier
designed for DBS applications and other commercial
communication systems. The MMIC takes an input 15
GHz signal and passes it through a harmonic frequency
multiplier (x2) and then three stages of power
amplification. Integrated matching structures filter and
match input/output to 50 Ω. It has integrated input
and output DC blocking capacitors and bias structures
to all stages. The MMIC is fabricated using PHEMT
technology. The backside of this package part is both
RF and DC ground. This helps simply the assembly
process and reduces assembly related performance
variations and costs. The surface mount package allows
elimination of “chip & wire” assembly for lower cost.
This MMIC is a cost effective alternative to hybrid
(discrete-FET) amplifiers that require complex tuning
and assembly process.
Surface Mount Package, 5.0 x 5.0 x 1.25 mm
Pin Connections (Top View)
1
2
3
Pin Function
1
2 V_d
3
4
RF _Out
5
8 X2
4
6
7
8 RF _In
Features
• 5x5 mm Surface Mount Package
• Integrated DC Block and Choke
• 50 Ω Input and Output Match
• Single Positive Supply Pin
• No Negative Gate Bias
Specifications (Vd=4.5V, Idd=200mA)
• Frequency Range 15GHz in, 30GHz out
• Output Power: 21 dBm
• Harmonic Suppression: 60dBc
• Single Positive Supply
• DC Requirements: 4.5V, 200mA
Applications
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• Broadband Wireless Access)
7
6
5
PACKAGE
BASE
GND
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure
that an ESD approved carrier is used when units are transported from one destination to another.
Personal grounding is to be worn at all times when handling these devices. The manufacturer
assumes no responsibilities for ESD damage due to improper storage and handling of these devices.