AMMP-5618_15 Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – 6–20 GHz General Purpose Amplifier

AMMP-5618
6–20 GHz General Purpose Amplifier
Data Sheet
Description
Avago’s AMMP-5618 is a high power, medium gain
amplifier that operates from 6 GHz to 20 GHz. The
amplifier is designed to be an easy-to-use component
for any surface mount PCB application. In c­ ommunication
systems, it can be used as a LO buffer, or as a transmit
driver amplifier. During typical o­ peration with a single
5V supply, each gain stage is biased for Class-A operation
for optimal power ­output with minimal distortion. The
amplifier has integrated 50Ω I/O match, DC blocking,
self-bias and choke to eliminate complex tuning and
assembly processes typically required by hybrid (discrete-
FET) ­amplifiers. The package is fully SMT compatible with
backside grounding and I/O to simplify assembly.
Note: These devices are ESD sensitive. The following pre-
cautions are strongly recommended. Ensure that an ESD
approved carrier is used when dice are ­transported from
one destination to another. Personal grounding is to be
worn at all times when handling these devices.
Package Diagram
Features
• 5 x 5 mm surface mount package
• Broad band performance 6–20 GHz
• High +19 dBm output power
• Medium 13 dB typical gain
• 50Ω input and output match
• Single 5V (107 mA) supply bias
Applications
• Microwave radio systems
• Satellite VSAT
• Commercial grade military
Functional Block Diagram
NC Vd NC
1
2
3
RF IN 8
4 RF OUT
7
6
5
NC NC NC
123
Pin Function
1
NC
2
Vd
8
4
3
NC
4
RF_out
5
NC
765
6
NC
7
NC
8
RF_in
Attention: Observe precautions for
handling electrostatic ­sensitive devices.
ESD Machine Model (Class A) = 50V
ESD Human Body Model (Class 0) = 150V
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.