AMMP-5024 Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – 30kHz - 40 GHz Traveling Wave Amplifier

AMMP-5024
30kHz – 40 GHz Traveling Wave Amplifier
Data Sheet
Description
Avago Technologies’ AMMP-5024 is a broadband PHEMT
GaAs MMIC TWA designed for medium output power and
high gain over the full 30 KHz to 40 GHz frequency range.
The design employs a 9-stage, cascade-connected FET
structure to ensure flat gain and power as well as uniform
group delay. E-beam lithography is used to produce
uniform gate lengths of 0.15um and MBE technology
assures precise semiconductor layer control.
Pin Connections (Top View)
Pin Function
1 V_aux
2 Not Used
3 Not Used
4 RF_out / Vdd
5 V_g1
6 Not Used
7 V_g2
8 RF_in
Features
• Surface Mount Package 5.0 x 5.0 x 2.0 mm
• Wide Frequency Range 30kHz – 40GHz
• High Gain: 14.8 dB Typical @ 22GHz
• Output P1dB: 22 dBm Typical @ 22GHz
• 50 Ohm Input and Output Match
Applications ^[1]
• Broadband Test and Measurement Applications
Notes:
1. Use in hermetic assemblies only.
Attention:
Observe precautions for handling
electrostatic sensitive devices.
RoHS-Exemption
Please refer to Hazardous substances table on page 11.
ESD Machine Model (Class A): 40V
ESD Human Body Model (Class 0): 150V
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.
Table 1. Absolute Maximum Ratings^[1]

Symbol
Parameters and Test Conditions
V_dd
Positive Drain Voltage
I_dd
Total Drain Current
V_g1
First Gate Voltage
I_g1
First Gate Current
V_g2
Second Gate Voltage
I_g2
Second Gate Current
P_in
CW Input Power
T_ch
Operating Channel Temperature
T_stg
Storage Case Temperature
T_max
Maximum Assembly Temperature (20 sec max)
Unit
Minimum
Maximum
V
- 10
mA
-
380
V
-9.5
0
mA
-38 1
V
-3.5
4
mA
-20
-
dBm
- 17
°C
-
+150
°C
-65
+150
°C
-
+260
Note:
1) Operation in excess of any one of these conditions may result in permanent damage to this device. The absolute maximum ratings
for DC and Power parameters were determined at an ambient temperature of 25°C unless noted otherwise.