AMMC-6442 Datasheet, PDF (1/8 Pages) AVAGO TECHNOLOGIES LIMITED – 37 - 40 GHz 1W Power Amplifier

AMMC-6442
37 - 40 GHz 1W Power Amplifier
Data Sheet
Description
The AMMC-6442 is a 1W power amplifier MMIC die for
use in transmitters that operate at frequencies between
37GHz and 40GHz. In the operational band, it provides
typical 30 dBm of output power (P-1dB) and 23dB of
small-signal gain. This MMIC is suitable for high linear ap-
plications, with typical performance of 37dBm OIP3 at
18dBm SCL output.
Features
x MMIC die using 4mil thickness
x 1 watt output power
x 50 : match on input and output
x ESD protection (50V MM, and 250V HBM)
Typical Performance (Vd=5V, Idsq=0.7A)
x Frequency range 37 to 40 GHz
x Small signal Gain of 23dB
x Output power @P-1 of 30dBm (Typ.)
x Output IP3 37dBm (Typ.) @Po=18dBm
x Input and Output return losses -8dB
Applications
x Point-to-Point Radio systems
x mmW Communications
Chip Dimensions
Chip Size: 2650 x 2000 Pm (100 x 80 mils)
Chip Size Tolerance: ± 10Pm (±0.4 mils)
Chip Thickness: 100 ± 10Pm (4 ± 0.4 mils)
Pad Dimensions: 100 x 100 Pm (4 x 4 ± 0.4 mils)
Note:
1. This MMIC uses depletion mode pHEMT devices. Negative supply is
used for DC gate biasing.
Attention: Observe Precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A): 50V
ESD Human Body Model (Class 1A): 250V
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.