AMMC-6431 Datasheet, PDF (1/9 Pages) AVAGO TECHNOLOGIES LIMITED – 25-33 GHz 0.7W Power Amplifier MMIC

AMMC-6431
25-33 GHz 0.7W Power Amplifier MMIC
Data Sheet
Description
The AMMC-6431 is an MMIC power amplifier designed for
use in wireless transmitters that operate within a 25GHz
and 33GHz range. At 32GHz, it provides 28.5dBm of output
power ⁽¹⁾ and 19.5dB of small-signal gain from a small easy-
to-use device. This MMIC is optimized for linear operation
with an output third order intercept point (OIP3) of 37dBm.
The device has input and output matching circuitry
for use in 50Ω environments. The AMMC-6431 also has
integrated, temperature compensated RF power detection
circuitry that enables power detection of 0.3V/Watt at
30GHz.
Features
• MMIC bare die
• 0.7 watt output power (P-1)
• 50 Ω match on input and output
Typical Performance (Vd=5V, Idsq=0.65A)
• Frequency range 25 to 33 GHz
• Small signal Gain of 19dB
• Output power @ P-1 of 28.5dBm (Typ.)
• Input/Output return-loss of -15dB/-15dB
Applications
• Microwave Radio systems
• Satellite VSAT, Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• WLL and MMDS loops
Note:
1. This MMIC uses depletion mode pHEMT devices. Negative supply is
used for DC gate biasing.
Chip Size: 2500 x 1870 μm (100 x 74 mils)
Chip Size Tolerance: ± 10 μm (± 0.4 mils)
Chip Thickness: 100 ± 10 μm (4 ± 0.4 mils)
Pad Dimensions: 100 x 100 μm (4 x 4 ± 0.4 mils)
Attention: Observe Precautions for
handling electrostatic sensitive devices.
Vdd and Vgg Pins: ESD Machine Model
(Class A): 50V
Vdd and Vgg Pins: ESD Human Body Model
(Class 0): 150V
Detector Pins: ESD Machine Model <20V
Detector Pins: ESD Human Body Model <60V
Refer to Avago Application Notes A004R
Electrostatic Discharge Damage and
ControlRefer to Avago Application Note
A004R:
Electrostatic Discharge Damage and Control.