AMMC-6425 Datasheet, PDF (1/7 Pages) AVAGO TECHNOLOGIES LIMITED – 18 - 28 GHz Power Amplifier

AMMC - 6425
18 - 28 GHz Power Amplifier
Data Sheet
Chip Size: 2500 x 1750 µm (100 x 69 mils)
Chip Size Tolerance: ± 10 µm (±0.4 mils)
Chip Thickness: 100 ± 10 µm (4 ± 0.4 mils)
Pad Dimensions: 100 x 100 µm (4 ± 0.4 mils)
Description
Features
The AMMC-6425 MMIC is a broadband 1W power amplifier
designed for use in transmitters that operate in various
frequency bands between 18GHz and 28GHz. This MMIC
optimized for linear operation with an output third order
intercept point (OIP3) of 38dBm. At 27GHz it provides
30dBm of output power (P-1dB) and 20dB of gain. The
device has input and output matching circuitry for use
in 50 Ω environments. The AMMC-6425 also integrates
a temperature compensated RF power detection circuit
that enables power detection of 0.3V/W. DC bias is simple
and the device operates on widely available 5V for cur-
rent supply (negative voltage only needed for Vg). It is
fabricated in a PHEMT process for exceptional power and
gain performance. For improved reliability and moisture
protection, the die is passivated at the active areas.
• Wide frequency range: 18 - 28 GHz
• High gain: 20 dB
• Power: @27 GHz, P-1dB=30 dBm
• Highly linear: OIP3=38dBm
• Integrated RF power detector
• 5.0 Volt, -0.6 Volt, 900mA operation
Applications
• Microwave Radio systems
• Satellite VSAT and DBS systems
• LMDS & Pt-Pt mmW Long Haul
• 802.16 & 802.20 WiMax BWA
• WLL and MMDS loops
• Commercial grade military
• Can be driven by AMMC-6345, increasing overall
gain.
AMMC-6425 Absolute Maximum Ratings^[1]
Symbol
Parameters/Conditions
Units
Min.
V_d
Positive Drain Voltage
V
V_g
Gate Supply Voltage
V
-3
I_d
Drain Current
mA
P_in
CW Input Power
dBm
T_ch
Operating Channel Temp. ° C
T_stg
Storage Case Temp.
°C
-65
T_max
Maximum Assembly Temp. ° C
(60 sec max)
Note:
1. Operation in excess of any one of these conditions may result in permanent damage to this device.
Max.
7
0.5
1500
23
+150
+150
+300
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure
that an ESD approved carrier is used when dice are transported from one destination to another.
Personal grounding is to be worn at all times when handling these devices