ALMD-CM3F Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – High brightness material

ALMD-CM3F,ALMD-CB3F
High Brightness SMT Round
Green & Blue LED Lamps
Data Sheet
Description
The new Avago ALMD-xx3F LED series has the same or
just slightly less luminous intensity than conventional
high brightness, through-hole LEDs.
The new LED lamps can be assembled using common
SMT assembly processes and are compatible with indus-
trial reflow soldering processes.
The LEDs are made with an advanced optical grade epoxy
for superior performance in outdoor sign applications
For easy pick and place assembly, the LEDs are shipped in
tape and reel. Every reel is shipped from a single intensity
and color bin for better uniformity
Package Dimensions
Package Marking
Features
• Compact form factor
• High brightness material
• Available in Green and Blue Color
• Green InGaN 525nm
• Blue InGaN 470nm
• Jedec MSL 2A
• Compatible with reflow soldering process
• Tinted lens
• Typical viewing angle: 30°
Applications
• Mono color signs
A
A
4.20
C
C
4.20
4.75 ± 0.50
A: Anode
C: Cathode
6.50 ± 0.50
1.60 ± 0.50
3.40 ± 0.50
2.50
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance is ± 0.20 mm, unless otherwise specified.
3. Mildsteel leadframe.
C
1.4 (4×)
A
1.00
CAUTION: InGaN devices are Class 1C HBM ESD sensitive, AlInGaP devices are Class 1B ESD sensitive per JEDEC Standard.
Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
CAUTION: Customer is advised to always keep the LED in the MBB with <5% RH when not in use as prolonged exposure to
environment might cause the silver-plated leads to tarnish or rust, which might cause difficulties in soldering.