ALM-42216 Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – (3.3 – 5)V Linear Wireless Data Power Amplifier for (2.3 – 2.7)GHz Operation

ALM-42216
(3.3 – 5)V Linear Wireless Data Power Amplifier
for (2.3 – 2.7)GHz Operation
Data Sheet
Description
Avago Technologies’ ALM-42216 is a fully-matched Power
amplifier module for use in the (2.3-2.7)GHz band. High
linear output power at 3.3V is achieved through the use of
Avago Technologies’ proprietary 0.25um GaAs Enhance-
ment-mode pHEMT process. It is housed in a miniature 5.0
x 5.0 x 1.1mm MCOB module. It includes shutdown and
switchable gain functions. A detector is also included on-
chip. The compact footprint and low profile coupled with
high gain and high efficiency make the ALM-42216 an
ideal choice as a power amplifier for IEEE 802.16 (Wimax)
and WLL applications.
Applications
• High linearity amplifier for IEEE 802.16 mobile and fixed
terminal amplifier
• WLL amplifier
Component Image
5.0 x 5.0 x 1.1 mm³ MCOB
42216
WWYY
XXXX
Top View
Pin Configuration
Notes:
Package marking provides orientation
and identification
“42216” = Device part number
“WWYY” = Work week and Year
“XXXX” = Assembly lot number
Features
• High Efficiency of 17.4% at low 3.3V supply voltage
• High gain : 30dB
• High linearity performance : 23.5dBm at 2.5% EVM
(64 QAM ¾ FEC rate OFDMA).
• Broadband Fully-matched 50 Ohm input and output
impedances
• >45dBc 2^nd harmonic attenuation
• Built-in detector and shutdown switches
• Switchable gain : 20 dB attenuation using one single
CMOS compatible switch pin
• GaAs E-pHEMT Technology^[1]
• Low cost small package size: 5.0 x 5.0 x 1.1 mm³
• Useable at 5V supplies for higher output power
Specifications
2.5GHz; 3.3V, Iqtotal=240 mA (typ)
• 30 dB Gain
• 23.5dBm linear Pout (2.5% EVM, 64QAM OFDMA)
• 25.5dBm linear Pout (2.5% EVM, 64QAM OFDMA)
@ Vdd=5V
• P1dB : 30dBm
• Detector range : 10dB (0.5V – 2.5V)
• 20 dB switchable gain attenuation
• Shutdown current : < 20uA
Notes:
1. Enhancement mode technology employs positive Vgs, thereby
eliminating the need of negative gate voltage associated with
conventional depletion mode devices.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 40 V
ESD Human Body Model = 200 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Top View