ALM-40220 Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – High power handling capability

ALM-40220
2.010GHz – 2.025GHz
TD-SCDMA 10 Watt High Power SPDT Switch
Data Sheet
Description
Avago Technologies’ ALM-40220 is a high power SPDT
switch with 10W power handling capability, high linearity
performance, low insertion loss and fast switching speed
through the use of Avago Technologies’ low distortion
silicon pin diode technologies. ALM-40220 is specifically
design for TD-SCDMA wireless infrastructure application.
The ALM-40220 is reflective SPDT switches and having
flexibility converting to absorptive mode with 50ohm load
configured externally. The circuitry needs dual positive
biasing control for Tx and Rx operation.
All matching components are fully integrated within the
module which makes the ALM-40220 extremely easy to
use. The only external parts are DC supply bypass capaci-
tors and RF choke inductor (refers to figure 16, page 10).
The ALM-40220 is housed in a miniature 5.0 x 5.0 x 1.0 mm³
multiple-chips-on-board (MCOB) module package with
5 pin configuration pads.
Component Image
5.0 x 5.0 x 1.0 mm³ 5-PIN MCOB Package
Ant
Port 2
40220
WWYY
XXXX
Tx
Port 1
Rx
Port 3
Features
• Fully matched
• High power handling capability
• High Linearity
• Fast switching speed
• Applicable in both reflective & absorptive
• 5V operating voltage
• Match diode for consistent performance
• Tape-and-Reel packaging option available
• MSL-3 with lead-free & halogen free
Specifications
• Tx band: Typical Performance at 2.01GHz
– Insertion loss: 0.45dB max
– Rx-Tx Isolation: 40dB typical
– 60 dBm Input IP3
– 41 dBm Input Power at 0.1dB Gain Compression
• Rx band: Typical performance at 2.01GHz
– Insertion loss: 0.6dB typical
– Tx-Rx Isolation: 26dB typical
Applications
• LNA Protection Switch for TD-SCDMA base station
Vc1 Vc2
Top View
Top View
Note:
Package marking provides orientation and identification
“40220” = Device Part Number
“WWYY” = Work week and year of manufacturer
“XXXX” = Last 4 digit of assembly lot number
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 250 V
ESD Human Body Model = 850 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.