|
ALM-2412 Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – GPS LNA-Filter Front-End Module | |||
|
ALM-2412
GPS LNA-Filter Front-End Module
Data Sheet
Description
Avago Technologiesâ ALM-2412 is an LNA module, with
integrated filter, designed for GPS band applications at
1.575GHz. The LNA uses Avago Technologiesâ proprietary
GaAs Enhancement-mode pHEMT process to achieve high
gain with very low noise figure and high linearity. Noise
figure distribution is very tightly controlled. A CMOS-com-
patible shutdown pin is included either for turning the
LNA on/off, or for current adjustment. The integrated filter
utilizes an Avago Technologiesâ leading-edge FBAR filter
for exceptional rejection at Cell/PCS-Band frequencies.
The ALM-2412 is useable down to 1V operation. It achieves
low noise figure, high gain and linearity even at 1V, making
it suitable for use in critical low-power GPS applications or
during low-battery situations.
Component Image
Surface Mount 3.3x2.1x1.1 mm3 12-lead MCOB
RF_IN 1
Gnd 2
SD 3
2412
XXXXX
9 Gnd
8 FILTER-OUT
7 Gnd
TOP VIEW
Gnd 9
FILTER-OUT 8
Gnd 7
1 RF_IN
2 Gnd
3 SD
BOTTOM VIEW
Note:
Package marking provides orientation and identification
â2412â
= Product Code
First âXâ
= Year of manufacture
Second âXâ
= Work week of manufacture
Third âXâ
= Datecode
Fourth & Fifth âXâ = Lot Number
Features
ï· Very Low Noise Figure : 0.85 dB typical
ï· High Gain : 13.5 dB typical
ï· High IIP3 and IP1dB
ï· Exceptional Cell/PCS-Band rejection
ï· Advanced GaAs E-pHEMT Technology
ï· Low external component count
ï· Wide Supply Voltage : 1V to 3.6V
ï· Shutdown current : < 0.1uA
ï· CMOS compatible shutdown pin (SD) current @ 2.8V :
0.1mA
ï· Adjustable current via single external resistor/voltage
ï· Meets MSL3, Lead-Free and Halogen-Free
ï· ESD-protected RF input: 3kV HBM
ï· Small package dimension: 3.3(L)x2.1(W)x1.1(H) mm3
Specifications (Typical performance at 25°C)
At 1.575GHz, Vdd = 2.85V, Idd = 9.0mA
ï· Gain = 13.5 dB
ï· NF = 0.85 dB
ï· IIP3 = +6.1 dBm, IP1dB = +2.2 dBm
ï· S11 = -8.4 dB, S22 =-9.0 dB
ï· Cell-Band Rejection: 53dBc
ï· PCS-Band Rejection: 65dBc
At 1.575GHz, 1.0V supply
ï· S21 = 7.2dB
ï· NF = 1.63dB
ï· Idd = 1.5mA
Application
ï· GPS Band LNA
Attention: Observe precautions for
handling electrostatic sensitive devices.
For RF_IN (Pin 1): ESD Human Body Model = 3 kV
All other pins: ESD Machine Model = 40 V
ESD Human Body Model = 300 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
|
▷ |