|
ALM-1106 Datasheet, PDF (1/10 Pages) AVAGO TECHNOLOGIES LIMITED – GPS Low Noise amplifier with Variable bias current and Shutdown function | |||
|
ALM-1106
GPS Low Noise amplifier with Variable bias current and
Shutdown function
Data Sheet
Description
Avago Technologiesâs ALM-1106 is a LNA
designed for GPS/ISM/Wimax applications in
the (0.9-3.5)GHz frequency range. The LNA
uses Agilent Technologiesâs proprietary GaAs
Enhancement-mode pHEMT process to achieve
high gain operation with very low noise figures
and high linearity. Noise figure distribution is
very tightly controlled. Gain and supply current
are guaranteed parameters. A CMOS compatible
shutdown pin is included to turn the LNA off
and provide a variable bias.
The ALM-1106 LNA is useable down to 1V
operation. It achieves low noise figures and
high gain even at 1V, making it suitable for
use in critical low power GPS/ISM band
applications.
Simplified Schmatic
VSD
VDD
BIAS
RF_IN C
C1
C
Amplifier2 C2
AMP1
RF_OUT
Surface Mount
2.0 x 2.0 x 1.1 mm3
O
AY
WW
Note:
Package marking
provides Orientation
and identification
âAâ = Product Code
âYâ = Year
âWWâ = Work Week
Pin Configuration
Pin 6
Pin 1
Pin 5
GND
Pin 2
Pin 4
Pin 3
Bottom View
LNA I/Oâs :
1. NC
4. VSD
2. RF_IN 5. RF_OUT
3. NC
6. VDD
BOTTOM PADDLE : GND
Features
⢠Advanced GaAs E-pHEMT
⢠Low Noise: 0.8 dB typ
⢠High Gain : 14.3 dB typ
⢠Low component count
⢠High IIP3 and IP1dB
⢠Wide Supply Voltage: 1V to 3.6V
⢠Shutdown current : < 0.1uA
⢠CMOS compatible shutdown pin (VSD) current @ 2.85V
: 90uA
⢠Adjustable bias current via one single external
resistor/voltage
⢠Small Footprint: 2x2mm2
⢠Low Profile: 1.1mm typ
⢠Ext matching for non-GPS freq band operation
Specifications (25 deg): At 1.575GHz, 2.85V 8mA (Typ)
⢠Gain = 14.3 dB (Typ)
⢠NF = 0.8 dB (Typ)
⢠IIP3 = 4.7 dBm (Typ)
⢠IP1dB = 1.8 dBm (Typ)
⢠S11 = -11.8 dB (Typ)
⢠S22 = -12.4 dB (Typ)
Typical performance @ 1.0V supply
S21 = 12.3dB
NF = 1.0dB
Ids = 3.6mA
Note:
Measurements obtained using demoboard described in Figure 4.
|
▷ |