AFCT-721XPDZ Datasheet, PDF (1/14 Pages) AVAGO TECHNOLOGIES LIMITED – 10GbE/10GFC 1310 nm XFP 10 Gbit/s Optical Transceiver

AFCT-721XPDZ
10GbE/10GFC 1310 nm XFP 10 Gbit/s Optical Transceiver
Data Sheet
Description
The 1310 nm XFP transceiver is a high performance, cost
effective module for serial optical data communications
applications specified for signal rates of 10.30 Gb/s to
11.3 Gb/s. It is compliant to XFP MSA Rev 4.5. The mod-
ule is designed for single mode fiber and operates at a
nominal wavelength of 1310 nm. The transmitter sec-
tion incorporates Avago Technologies’ uncooled directly
modulated 1310 nm distributed feedback laser (DFB).
The receiver section uses Avago Technologies’ MOVPE
grown planar TEDET PIN photodetector for low dark
current and excellent responsivity. Integrated Tx and Rx
signal conditioners provide high jitter-tolerance for full
XFI compliance. The internally AC coupled high speed
serial I/O simplifies interfacing to external circuitry. The
electrical interface is made using an industry standard
0.8 mm pitch 30-pin right angle connector. Optical con-
nection is made via the duplex LC connector.
Applications
• Fibre Channel Switches
• Host Bus Adapter Cards
• Mass Storage System and Server I/O
• Ethernet Switches
• Core Routers
Related Products
• AFCT-711XPDZ:Multi-rate1310nmXFP10Gbit/sOptical
Transceiver for SONET/SDH OC-192, 10GbE & 10GFC
• AFBR-720XPDZ: 10GbE 850nm XFP 10Gbit/s Optical
Transceiver
Features
• RoHS-6 Compliant
• Supports 10.3Gb/s to 11.3Gb/s bit rates
• Compliant to XFP MSA
• Supports 10Gb/s Ethernet and Fibre Channel
- IEEE 802.3ae 10GBASE-LR for 10GbE, 10.3125 Gb/s
- 10GFC 1310 nm Serial PMD, type 1200-SM-LL-L,
10.51875 Gb/s
• Avago Technologies’uncooled 1310 nm DFB Laser and
PIN Photodiode
• Compliant XFI 10G Serial electrical interface
• LC Duplex optical connector interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10)
• 1.5W typical power dissipation
• No Reference Clock required
• Superior Thermal and EMI integrity performance to
support high port densities
• Customizable clip-on heatsink to support a variety of
line card environments
• -5 to +70 °C case operating temperature range
• Support XFI loopback
• 2-wire serial management interface provides real time
monitors of:
- Transmitted Optical Power
- Received Optical Power
- Laser Bias Current
- Module Temperature
• Link Lengths up to 10 km with 9 µm fiber
• IEC 60825-1 Class 1/CDRH Class 1 laser eye safety.