AFCT-701SDZ_15 Datasheet, PDF (1/18 Pages) AVAGO TECHNOLOGIES LIMITED – SFP+ Transceiver for SMF 10km links

AFCT-701SDZ
10Gb Ethernet, 1310 nm, 10GBASE-LR,
SFP+ Transceiver for SMF 10km links
Data Sheet
Description
The Avago AFCT-701SDZ transceiver is part of a family of
SFP+ products. This transceiver utilizes Avago’s 1310nm
DFB and PIN Detector technology to provide an IEEE
10Gb Ethernet design compliant with the 10GBASE-LR
standard. The AFCT-701SDZ transceiver is designed to
enable 10Gb Ethernet equipment designs with very high
port density based on the new electrical and mechani-
cal specification enhancements to the well known SFP
specifications developed by the SFF Committee. These
specifications are referred to as SFP+ to recognize these
enhancements to previous SFP specifications used for
lower speed products. Avago Technologies is an active
participant in the SFF Committee specification develop-
ment activities.
Related Products
x AFCT-701ASDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LR transceiver with case temperature operated at
0-85 °C for operation in SMF link applications to 10
km
x AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LRM transceiver for 220 meter operation in all MMF
link applications including OM1 and OM2 legacy fiber
cables and new high bandwidth OM3 fiber cables.
x The AFBR-703SDZ (AFBR-703ASDZ) with case
temperature 0-70 (0-85) °C is an SFP+ 10 Gigabit
Ethernet 10GBASE-SR transceiver for use on
multimode fiber cables. It is best suited for OM3 high
bandwidth MMF link applications with link lengths up
to 300 meters.
x AFCT-5016Z SFP+ Evaluation Board The purpose of
this SFP+ evaluation board is to provide the designer
with a convenient means for evaluating SFP+ fiber
optic transceivers.
Features
x Avago 1310nm DFB source and Transmitter Optical
Subassembly technology
x Avago PIN detector and Receiver Optical Subassembly
technology
x Typical power dissipation 850mW
x Full digital diagnostic management interface
x Avago SFP+ package design enables equipment EMI
performance in high port density applications with
margin to Class B limits
Specifications
x Optical interface specifications per IEEE 802.3ae
10GBASE-LR
x Electrical interface specifications per SFF Committee
SFF 8431 Specifications for Enhanced 8.5 and 10
Gigabit Small Form Factor Pluggable Module “SFP+”
x Management interface specifications per SFF
Committee SFF 8431 and SFF 8472 Diagnostic
Monitoring Interface for Optical Transceivers
x Mechanical specifications per SFF Committee SFF
8432 Improved Pluggable Formfactor “IPF”
x LC Duplex optical connector interface confirming to
ANSI TIA/EA 604-10 (FOCIS 10A)
x Compliant to Restriction on Hazardous Substances
(RoHS) per EU and China requirements
x Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH