AFCT-57J5APZ Datasheet, PDF (1/19 Pages) AVAGO TECHNOLOGIES LIMITED – Digital Diagnostic SFP, 1310nm, Fabry Perot 3.072/2.4576 Gb/s, RoHS OBSAI/CPRI Compatible Optical Transceiver

AFCT-57J5APZ
Digital Diagnostic SFP, 1310nm, Fabry Perot 3.072/2.4576 Gb/s,
RoHS OBSAI/CPRI Compatible Optical Transceiver
Data Sheet
1310nm, SFP (Small Form Pluggable), Low Voltage (3.3V)
Digital Diagnostic, Optical Transceiver
Description
Avago’s AFCT-57J5APZ optical transceiver supports
high speed serial links over single mode optical fiber at
signaling rates up to 3.072Gb/s for wireless base station
applications involving the OBSAI or CPRI protocols, as
well as related applications. The transceiver is compliant
with Small Form Pluggable (SFP) single-source agree-
ments INF-8074 and SFF-8472 for mechanical and electri-
cal specifications and FOCIS/IEC specifications for optical
duplex LC connectors.
As an enhancement to the conventional SFP interfaced
defined in INF-8074, the AFCT-57J5APZ is compliant to
SFF-8472 (Digital Diagnostic Interface for Optical Trans-
ceivers). Using the 2-wire serial interface defined in SFF-
8472, the transceiver provides real time temperature,
supply voltage, laser bias current, laser average output
power and received input power. This information is in
addition to conventional SFP base data. The digital diag-
nostic interface also adds the ability to disable the trans-
mitter and monitor the status of transmitter fault and
receiver loss of signal.
Related Products
• AFBR-57J5AEZ: 850nm +3.3V LC SFP
for OBSAI and CPRI
• AFCT-57R5AEZ: 1310nm +3.3V LC SFP
for 4.25/2.125/1.0625 GBd Fibre Channel
• AFBR-57R5AEZ: 850nm +3.3V LC SFP
for 4.25/2.125/1.0625 GBd Fibre Channel
• AFCT-57D5APZ: 1310nm +3.3V LC SFP
for 8.5/4.25/2.125 GBd Fibre Channel
Features
• Fully RoHS Compliant
• Diagnostic Features Per SFF-8472 “Diagnostic
Monitoring Interface for Optical Transceivers”
• Real time monitors of:
- Transmitted Optical Power
- Received Optical Power
- Laser Bias Current
- Temperature
- Supply Voltage
• Industrial Temperature and Supply Voltage Operation
(-40°C to 85°C) (3.3V ± 10%)
• Transceiver Specifications per SFP (INF-8074) and SFF-
8472 (revision 9.6)
• Up to 7km with 9um fiber for 3.072 Gb/s
• Up to 8km with 9um fiber for 2.4576 Gb/s
• LC Duplex optical connector interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10A)
• 1310nm Fabry Perot Laser (FP) Source Technology
• IEC 60825-1 Class 1/CDRH Class 1 laser eye safe
• Compatible with Fibre Channel and Gigabit Ethernet
applications
Applications
Wireless and cellular base station system interconnect:
OBSAI rates: 3.072 Gb/s, 1.536 Gb/s, 0.768 Gb/s
CPRI rates: 3.072 Gb/s, 2.4576 Gb/s, 1.2288 Gb/s, 0.6144
Gb/s