AFCT-57F5ATMZ Datasheet, PDF (1/16 Pages) AVAGO TECHNOLOGIES LIMITED – Fibre Channel Optical Transceiver

AFCT-57F5ATMZ
Digital Diagnostic SFP+, 1310 nm, 16 GFC [14.025/8.5/4.25 GBd]
Fibre Channel Optical Transceiver
Temperature Range 0 to 85 °C T_case
Data Sheet
AF1C321T1C0-C5nHSF7mINFRN:5L(AAjAA) ^{TASCM1EL2ZAR2S5P1S6R2012O052DK}
Description
Avago Technologies’ AFCT-57F5ATMZ optical transceiver
supports high speed serial links over single mode opti-
cal fiber at signalling rates up to 14.025 Gb/s (the serial
line rate of 16 GFC). The product is compliant with Small
Form Pluggable industry agreements SFP and SFP+ for
mechanical and low speed electrical specifications. High
speed electrical and optical specifications are compliant
with ANSI Fibre Channel FC-PI-5.
The AFCT-57F5ATMZ is a multi-rate 1310 nm transceiver
which ensures compliance with FC-PI-5 16 GFC, 8 GFC and
4 GFC specifications. Per the requirements of 16 GFC, an
internal clock and data recovery circuit (CDR) is present
on the electrical output of this transceiver. This CDR will
lock at 14.025Gb/s (16 GFC) but must be bypassed for op-
eration at 8.5Gb/s (8 GFC) and 4.25Gb/s (4 GFC), accom-
plished by using Rate Select inputs to configure transmit
and receive sides. Transmitter and receiver can operate at
different data rates, as is often seen during Fibre Channel
speed negotiation.
Digital diagnostic monitoring information (DMI) is present
in the AFCT-57F5ATMZ per the requirements of SFF-8472,
providing real time monitoring information of transceiver
laser, receiver and environment conditions over a SFF-
8431 2-wire serial interface.
Related Products
• AFBR-57F5TPZ: 850 nm SFP for 16G/8G/4G Fibre Channel
• AFBR-57D7APZ: 850 nm SFP for 8G/4G/2G Fibre Channel
• AFCT-57D5ATPZ: 1310 nm SFP for 8G/4G/2G Fibre Channel
• AFCT-57D5ANPZ: 1310 nm SFP for 8G/4G/2G Fibre Channel
• AFBR-57R5APZ: 850 nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5APZ: 1310 nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5ATPZ: 1310 nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5ANPZ: 1310 nm SFP for 4G/2G/1G Fibre Channel
Features
• Compliant to RoHS directives
• 1310nm Distributed Feedback Laser (DFB)
• Class 1 eye safe per IEC60825-1 and CDRH
• Wide temperature range (0 °C to 85 °C)
• LC duplex connector optical interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10A)
• Diagnostic features per SFF-8472 “Diagnostic
Monitoring Interface for Optical Transceivers”
• Enhanced operational features including EWRAP,
OWRAP and variable electrical EQ/emphasis settings
• Real-time monitoring of:
- Transmitter average optical power
- Received average optical power
- Laser bias current
- Temperature
- Supply Voltage
• SFP+ mechanical specifications per SFF-8432
• Pull Tab delatch mechanism
• SFP+ compliant low speed interface
• Fibre Channel FC-PI-5 compliant high speed interface
- 1600- SM-LC-L, 800- SM-LC-L, 400-SM-LC-L
• Fibre Channel FC-PI-5 compliant 10km link distances
Applications
• Fibre Channel switches (director, stand alone, blade)
• Fibre Channel Host Bus Adapters
• Fibre Channel RAID controllers
• Fibre Channel tape drive
• Port side connections
• Inter-switch or inter-chassis aggregated links