AFCT-5710Z_15 Datasheet, PDF (1/19 Pages) AVAGO TECHNOLOGIES LIMITED – Optical Transceivers with Optional DMI for Gigabit Ethernet

AFCT-5710Z and AFCT-5715Z
Families of Single-Mode Small Form Factor Pluggable (SFP)
Optical Transceivers with Optional DMI for Gigabit Ethernet (1.25 GBd)
Data Sheet
Description
The AFCT-571xZ family of Small Form Factor Pluggable
(SFP) LC optical transceivers offers a wide range of
design options, including optional DMI features (further
described later), two temperature ranges (extended or
industrial), and choice of standard or bail delatch. The
AFCT-5715Z family targets applications requiring DMI,
while the AFCT-5710Z family is streamlined for those
applications where DMI is not needed. Throughout this
datasheet, AFCT-571xZ will refer to the entire product
family encompassing this full range of product options.
Part Number Options
The AFCT-571xZ SFP family consists of the following
products:
Part Number DMI
AFCT-5710LZ No
AFCT-5710PZ No
AFCT-5710ALZ No
AFCT-5710APZ No
AFCT-5715LZ Yes
AFCT-5715PZ Yes
AFCT-5715ALZ Yes
AFCT-5715APZ Yes
Temperature
Extended
Extended
Industrial
Industrial
Extended
Extended
Industrial
Industrial
Latch Design
Standard
Bail
Standard
Bail
Standard
Bail
Standard
Bail
* Extended Temperature Range is -10 to 85 degrees C
Industrial Temperature Range is -40 to 85 degrees C
Related Products
• AFBR-5705Z SFP family: 1.25GBd Ethernet
(1000BASE-SX) & 1.0625GBd Fiber Channel with DMI
• AFBR-5701Z SFP family: 1.25GBd Ethernet
(1000BASE-SX) & 1.0625GBd Fiber Channel without
DMI
• AFCT-5715Z SFP family: 1.25GBd Ethernet
(1000BASE-LX) with DMI
• AFCT-5710Z SFP family: 1.25GBd Ethernet
(1000BASE-LX) without DMI
Features
• ROHS-6 Compliant
• Optional Digital Diagnostic Monitoring available
- AFCT-5710Z family: without DMI
- AFCT-5715Z family: with DMI
• Per SFF-8472, diagnostic features on AFCT-5715Z
family enable Diagnostic Monitoring Interface for
optical transceivers with real-time monitoring of:
- Transmitted optical power
- Received optical power
- Laser bias current
- Temperature
- Supply voltage
• Compliant to IEEE 802.3Z Gigabit Ethernet (1.25 GBd)
1000BASE-LX & Small Form Factor Pluggable (SFP)
Multi-Source Agreement (MSA)
• Manufactured in an ISO 9001 compliant facility
• Hot-pluggable
• Temperature options
(Extended) -10°C to +85°C
(Industrial) -40°C to +85°C
• +3.3 V dc power supply
• 1310 nm longwave laser
• Eye safety certified:
- US 21 CFR(J)
- IEC 60825-1 (+All)
• LC-Duplex fiber connector compatible
• Link Lengths at 1.25 GBd:
- 0.5 to 550 m - 50 μm MMF
- 0.5 to 550 m - 62.5 μm MMF
- 0.5 m to 10 km - SMF
Applications
• Ethernet Switch
• Enterprise Router
• Broadband aggregation and wireless infrastructure
• Metro Ethernet multi-service access & provisioning
platforms