AFBR-83PDZ_15 Datasheet, PDF (1/27 Pages) AVAGO TECHNOLOGIES LIMITED – CXP Pluggable, Parallel Fiber-Optics Module

AFBR-83PDZ
12Channel x 10.3125Gbps Transceiver
CXP Pluggable, Parallel Fiber-Optics Module
Data Sheet
Description
The Avago Technologies AFBR-83PDZ is a Twelve-Channel,
Pluggable, Parallel, Fiber-Optic CXP Transceiver for 100
Gigabit Ethernet (100GbE) and 12 x 10G InfiniBand (IB)
quadruple data rate (IB-QDR) applications. This transceiver
is a high performance module for short-range multi-lane
data communication and interconnect applications. It
integrates twelve data lanes in each direction with greater
than 120 Gbps aggregate bandwidth. Each lane can
operate at 10.3125 Gbps up to 100 m using OM3 fiber and
150m using OM4 fiber. These modules are backward com-
patible to the 12 x 5G IB dual data rate (IB-DDR) and 12 x
2.5G IB single data rate (IB-SDR) applications.
These modules are designed to operate over multimode
fiber systems using a nominal wavelength of 850 nm.
The electrical interface uses an 84-contact edge type
connector. The optical interface uses a 24-fiber MTP^
(MPO) connector. This module incorporates Avago Tech-
nologies proven integrated circuit and VCSEL technology
to provide reliable long life, high performance, and con-
sistent service.
Applications
• 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
• Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
• Datacom/Telecom switch & router connections
Part Number Ordering Options
AFBR-83PDZ 12x 10.3125 Gbps (Ethernet) and IB-QDR/
IB-DDR/IB-SDR with Full Diagnostic Monitoring
AFBR-83EVB CXP Evaluation Board
AFBR-83EVK* CXP Evaluation Kit
* Includes GUI, User Guide, i-Port and Power Supply
Features
• Compliant to SFF-8642: Mini Multilane Series: Shielded
Integrated Connector, and IBTA Annex A6 CXP Interface
Specification
• Each of the twelve channels is compliant on a per
lane electrical and optical specification basis with
the IEEE 802.3ba 100GbE (100 GBASE-SR10 and CPPI)
specifications, and supporting InfiniBand QDR/DDR/
SDR application
• Multi-rate capable from 1 Gbps to 10.5 Gbps
• High Channel Capacity: >120 Gbps per module, bi-
directional, with twelve independent Transmitters and
Receivers each
• Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and at 10 Gbps
with 8b/10b encoded data for IB-QDR application
• Hot Pluggable
• Links up to 100 m using OM3 fiber and 150 m using
OM4 fiber
• 0 to 70° C case temperature operating range
• 3.3 V power supply only
• Low power dissipation of < 3 W
• Proven High Reliability 850 nm technology: Avago
VCSEL array transmitter and Avago PIN array receiver
• Two Wire Serial (TWS) interface with maskable interrupt
for expanded functionality including:
– Individual channel functions: channel/output dis-
able, squelch disable, and lane polarity inversion
– Diagnostic Monitoring functions: module tempera-
ture and supply voltages, per channel laser current
and laser power, and input receiver power
– Status per channel: Tx fault, electrical (transmitter)
and optical (receiver) LOS, and alarm flags
• Utilizes a standard 24 lane optical fiber with MTP^
(MPO) optical connector for high density and thin,
light-weight cable management
Patent - www.avagotech.com/patents
Avago Technologies Confidential