AFBR-83PDZ Datasheet, PDF (1/2 Pages) AVAGO TECHNOLOGIES LIMITED – 12Channel x 10.3125Gbps Transceiver CXP Pluggable, Parallel Fiber-Optics Module

AFBR-83PDZ
12Channel x 10.3125Gbps Transceiver
CXP Pluggable, Parallel Fiber-Optics Module
Product Brief
Description
The Avago Technologies AFBR-83PDZ is a Twelve-
Channel, Pluggable, Parallel, Fiber-Optic CXP Transceiver
for 100 Gigabit Ethernet (100GbE) and 12 x 10G Infini-
Band (IB) quadruple data rate (IB-QDR) applications. This
transceiver is a high performance module for short-range
multi-lane data communication and interconnect applica-
tions. It integrates twelve data lanes in each direction with
greater than 120 Gbps aggregate bandwidth. Each lane
can operate at 10.3125 Gbps up to 100 m using OM3 fiber
and 150m using OM4 fiber. These modules are backward
compatible to the 12 x 5G IB dual data rate (IB-DDR) and
12 x 2.5G IB single data rate (IB-SDR) applications.
These modules are designed to operate over multimode
fiber systems using a nominal wavelength of 850nm. The
electrical interface uses an 84-contact edge type con-
nector. The optical interface uses a 24-fiber MTP^ (MPO)
connector. This module incorporates Avago Technologies
proven integrated circuit and VCSEL technology to pro-
vide reliable long life, high performance, and consistent
service.
Applications
• 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
• Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
• Datacom/Telecom switch & router connections
Part Number Ordering Options
AFBR-83PDZ 12x 10.3125Gbps (Ethernet) and IB-QDR/IB-
DDR/IB-SDR with Full Diagnostic Monitoring
AFBR-83EVB CXP Evaluation Board
AFBR-83EVK* CXP Evaluation Kit
* Includes GUI, User Guide, i-Port and Power Supply
Features
• Compliant to SFF-8642: Mini Multilane Series: Shielded
Integrated Connector, and IBTA Annex A6 CXP Interface
Specification
• Each of the twelve channels is compliant on a per
lane electrical and optical specification basis with
the IEEE 802.3ba 100GbE (100GBASE-SR10 and CPPI)
specifications, and supporting InfiniBand QDR/DDR/
SDR application
• Multi-rate capable from 1 Gbps to 10.5 Gbps
• High Channel Capacity: >120Gbps per module, bi-
directional, with twelve independent Transmitters and
Receivers each
• Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and at 10 Gbps
with 8b/10b encoded data for IB-QDR application
• Hot Pluggable
• Links up to 100 m using OM3 fiber and 150 m using
OM4 fiber
• 0 to 70° C case temperature operating range
• 3.3V power supply only
• Low power dissipation of < 3 W
• Proven High Reliability 850 nm technology: Avago
VCSEL array transmitter and Avago PIN array receiver
• Two Wire Serial (TWS) interface with maskable interrupt
for expanded functionality including:
– Individual channel functions: channel/output
disable, squelch disable, and lane polarity inversion
– Diagnostic Monitoring functions: module
temperature and supply voltages, per channel laser
current and laser power, and input receiver power
– Status per channel: Tx fault, electrical (transmitter)
and optical (receiver) LOS, and alarm flags
• Utilizes a standard 24 lane optical fiber with MTP^
(MPO) optical connector for high density and thin,
light-weight cable management