AFBR-83EDZ Datasheet, PDF (1/27 Pages) AVAGO TECHNOLOGIES LIMITED – CXP Pluggable, Parallel Fiber Optics Module

AFBR-83EDZ
100 Gigabit Ethernet (100GBASE-SR10) Transceiver
CXP Pluggable, Parallel Fiber Optics Module
Data Sheet
AFBR-83EDZ
Description
The Avago Technologies AFBR-83EDZ is a Ten-Channel,
Pluggable, Parallel, Fiber-Optic CXP Transceiver for
100 Gigabit Ethernet application. This transceiver
is a high performance module for short-range multi-lane
data communication and interconnect applications. It
integrates ten data lanes in each direction with greater
than 100 Gbps aggregate bandwidth. Each lane can
operate at 10.3125 Gbps up to 100 m using OM3 fiber and
150 m using OM4 fiber. These modules support 10G Infini-
Band (IB) quadruple data rate (IB-QDR) application and are
backward-compatible to the 5 G IB dual data rate (IB-DDR)
and 2.5 G IB single data rate (IB-SDR) applications.
These modules are designed to operate over multimode
fiber systems using a nominal wavelength of 850 nm.
The electrical interface uses an 84-contact edge type
connector. The optical interface uses a 24-fiber MTP^
(MPO) connector. This module incorporates Avago Tech-
nologies' proven integrated circuit and VCSEL technology
to provide reliable long life, high performance, and con-
sistent service.
Applications
• 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
• Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
• Datacom/Telecom switch and router connections
Part Number Ordering Options
AFBR-83EDZ 100 Gigabit Ethernet with Full Diagnostic
Monitoring
AFBR-83EVB CXP Evaluation Board
AFBR-83EVK* CXP Evaluation Kit
* Includes GUI, User Guide, i-Port and Power Supply
Features
• Compliant to the 100GBASE-SR10 and CPPI
Specifications per IEEE 802.3ba-2010 and supporting
InfiniBand QDR/DDR/SDR applications
• Compliant to SFF-8642: Mini Multilane Series: Shielded
Integrated Connector, and InfiniBand Architecture
Specification V2 R1.3 for CXP Interface
• Ten channels are located from lane 1 to lane 10
• Multi-rate capable from 1 Gbps to 10.5 Gbps
• High Channel Capacity: >100 Gbps per module, bi-
directional, with ten independent Transmitters and
Receivers each
• Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and at 10 Gbps
with 8b/10b encoded data for IB-QDR application
• Hot Pluggable
• Links up to 100 m using OM3 fiber and 150 m using
OM4 fiber
• 0 to 70 °C case temperature operating range
• 3.3 V power supply only
• Low power dissipation of < 3 W
• Proven High Reliability 850 nm technology: Avago
VCSEL array transmitter and Avago PIN array receiver
• Two Wire Serial (TWS) interface with maskable interrupt
for expanded functionality including:
– Individual channel functions: channel/output dis-
able, squelch disable, and lane polarity inversion
– Diagnostic Monitoring functions: module tempera-
ture and supply voltages, per channel laser current
and laser power, and input receiver power
– Status per channel: Tx fault, electrical (transmitter)
and optical (receiver) LOS, and alarm flags
• Utilizes a standard 24 lane optical fiber with MTP^
(MPO) optical connector for high density and thin,
lightweight cable management
Avago Technologies Confidential