|
AFBR-811FN1Z Datasheet, PDF (1/3 Pages) AVAGO TECHNOLOGIES LIMITED – 10 Gbps/Channel Twelve Channel, Parallel Fiber Optics Modules | |||
|
MiniPODâ¢
AFBR-811VxyZ, AFBR-821VxyZ
10 Gbps/Channel
Twelve Channel, Parallel Fiber Optics Modules
Product Brief
Description
Features
The AFBR-811VxyZ Twelve Channel, Pluggable, Parallel
Fiber Optics Transmitter and AFBR-821VxyZ Twelve
Channel, Pluggable, Parallel Fiber Optics Receiver are high
performance fiber optics modules for short-range parallel
multi-lane data communication and interconnect applica-
tions. The high density optical modules are designed to
operate over multimode fiber systems using a nominal
wavelength of 850 nm.
Avagoâs MiniPOD solution offers system designers two
module package options to optimize their cable manage-
ment and board layout. AFBR-811RxyZ Tx/AFBR-821RxyZ
Rx is used with round multi-lane cable assemblies for
applications requiring multiple turns of the jumper cable
inside the chassis. AFBR-811FxyZ Tx/AFBR-821FxyZ Rx is
used with flat ribbon cable assemblies, allowing dense
tiling of the modules as the jumper cables can be thread
under the dust-cap of the next module. This top mounted
optical connection maximizes board layout density by
eliminating board space lost to the optical connector and
strain relief.
The electrical interface uses a 9Ã9 MEG-Array connector
with 1.27 mm pitch
http://portal.fciconnect.com/Comergent//fci/drawing/
55714.pdf
The optical interface requires the user to provide a
custom designed optical turn 1Ã12 ribbon cable PRIZM
LightTurn connector.
The thermal interface provided can require either a user
provided heat sink or use of the Avago general purpose
clip on heat sink, to maintain the module case temperature
to be between 0 °C to 70 °C during continuous operation.
Applications
⢠100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
⢠Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
⢠High Performance and High Productivity computer
interconnects
⢠Switch Fabric interconnects
Patent - www.avagotech.com/patents
⢠Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10
and nPPI) per lane
⢠Compliant to 12ÃQDR Infiniband
⢠Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and at 10 Gbps
with 8b/10b encoded data for IB-QDR application
⢠High Aggregate bandwidth: 120 Gbps per module
⢠High density footprint: 21.95 mm à 18.62 mm size
⢠Two package options to optimize internal cable
management and system layout
⢠Separate transmitter and receiver modules
⢠850 nm VCSEL array in transmitter; PIN array in receiver
⢠Links up to 150 m at 10.3125 Gbps with OM4 4700
MHzâ¢km 50 mm MMF
⢠Optical Interface: PRIZM LightTurn optical turn 1Ã12
ribbon fiber connector
⢠Pluggable electrical interface: 9Ã9 MEG-Array for ease
of design and manufacturability
⢠Low Power consumption: 3.0 W Max per Transmitter/
Receiver pair (0 °C to 70 °C operating range)
⢠Dedicated signals for module address, module reset
and host interrupt
⢠Two Wire Serial (TWS) interface with maskable interrupt
for expanded functionality including:
â Individual channel functions: disable, squelch dis-
able, lane polarity inversion, TX eye margin enable
â A/D read back: module temperature and supply
voltages, per channel laser current and laser power,
or received power
â Status: per channel Tx fault, electrical (transmitter) or
optical (receiver) LOS, and alarm flags
â Programmable equalization integrated with DC
blocking caps at transmitter data input
â Programmable receiver output swing and de-
emphasis level
â Field Upgradable Firmware capability
⢠0 °C to 70 °C case temperature continuous operating
range. 85 °C supported for short durations
|
▷ |