AFBR-7IERXXZ Datasheet, PDF (1/6 Pages) AVAGO TECHNOLOGIES LIMITED – QSFP+ to 4 SFP+ Breakout Active Optical Cable

AFBR-7IERxxZ
QSFP+ to 4× SFP+ Breakout Active Optical Cable
Data Sheet
Description
The Avago Technologies AFBR-7IERxxZ is a Four-Channel,
Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Ca-
ble (AOC) to 4× SFP+ Active Optical Cable break-out solu-
tion. This Breakout cable is intended for 40G to 4× 10G
applications.
This AOC is a high performance cable for short-range
multi-lane data communication and interconnect appli-
cations. It integrates four data lanes in each direction with
40 Gbps aggregate bandwidth. Each lane can operate at
10.3125 Gbps. These cables also support 4 x 10G Infini-
Band QDR applications and are backwards compatible to
the 4 × 5G IB DDR and 4 × 2.5G IB single IB SDR applica-
tions.
This product is leveraged from Avago Technologies QSFP+
to QSFP+ Active Optical Cable product (AFBR-7QERxxZ)
and SFP+ Active Optical Cable product (AFBR-2CARxxZ).
Where applicable, consult these respective datasheets
This AOC incorporates Avago Technologies' proven inte-
grated circuit and VCSEL technology to provide reliable
long life, high performance, and consistent service.
Applications
• 40GbE and 10GbE break-out applications for Datacom
switch and router connections
• 40G to 4×10G density applications for Datacom and
Proprietary protocol applications
Features
QSFP+ AOC end:
• Compliant to the 40GBASE-SR4 and XLPPI Specification
per IEEE 802.3ba-2010 and supporting 40G-IB-QDR /
20G-IB-DDR / 10G-IB-SDR applications
• Compliant to the industry standard SFF-8436 QSFP+
Specification
• Power Level 1: Max Power < 1.5 W
• Operate at 10.3125 Gbps per channel with 64b/66b
encoded data for 40GbE application and at 10 Gbps
with 8b/10b compatible encoded data for 40G-IB-QDR
application
Each 4× SFP+ end:
• Compliant to the electrical specifications per SFF-
8431 Specifications for Enhanced Small Form Factor
Pluggable Module
• Mechanical specifications per SFF Committee SFF-8432
Improved Pluggable Form factor “IPF”
• Maximum power dissipation 350 mW
Active Optical Cable Assembly:
• 0 to 70 °C case temperature operating range
• Proven High Reliability 850 nm technology: Avago
VCSEL transmitter and Avago PIN receiver
• Hot pluggable for ease of servicing and installation
• Two Wire Serial (TWS) interface
• Utilizes optical fiber for high density and thin,
lightweight cable management
 
Patent - www.avagotech.com/patents