AFBR-77D13SZ Datasheet, PDF (1/53 Pages) AVAGO TECHNOLOGIES LIMITED – Twelve Channel Parallel Fiber Optics Modules

MicroPOD™
AFBR-77D13SZ, AFBR-78D13SZ
10 Gbps/Channel
Twelve Channel Parallel Fiber Optics Modules
Data Sheet
Description
The AFBR-77D13SZ Twelve Channel, Pluggable, Paral-
lel Fiber Optics Transmitter and AFBR-78D13SZ Twelve
Channel, Pluggable, Parallel Fiber Optics Receiver are high
performance fiber optics modules for short-range paral-
lel multi-lane data communication and interconnect ap-
plications. The high density optical modules are designed
to operate over multimode fiber systems using a nominal
wavelength of 850 nm.
The optical interface requires the user to provide a custom
designed optical turn 1×12 ribbon cable PRIZM® Light-
Turn® connector.
Applications
• 100GbE, 10GbE and IB-QDR/ IB-DDR/ IB-SDR
interconnects
• Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
• High Performance and High Productivity computer
interconnects
• Switch Fabric interconnects
Part Number Ordering Options
Base Part Number
Modules for use with
Flat Ribbon Jumper Cable
Transmitter
Receiver
AFBR-77D13SZ
AFBR-78D13SZ
MicroPOD Evaluation Board (Tx)
AFBR- 77EVB
MicroPOD Evaluation Board (Rx)
AFBR- 78EVB
Where:
77 = Transmitter;
78 = Receiver
Patent - www.avagotech.com/patents
Features
• Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10
and nPPI) per lane and compatible with 10GBASE-SR
• Compliant to 12×QDR Infiniband
• Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and with 8b/10b
for 10GbE applications. Supports 10 Gbps with 8b/10b
for IB-QDR applications
• High Aggregate bandwidth: 120 Gbps per module
• High density footprint: 7.8 mm × 8.2 mm × 3.9 mm size
• Separate transmitter and receiver modules;
• 850 nm VCSEL array in transmitter; PIN array in receiver
• 10.3125 Gbps links up to 300 m & 400 m with OM3 &
OM4 4700 MHz∙km 50 µm MMF
• Optical Interface: PRIZM™ LightTurn® optical turn 1×12
ribbon fiber connector
• Electrical interface: 9×9 micro-LGA with 0.7424 mm
pitch
• Low Power consumption: 3.0 W Max per Transmitter /
Receiver pair (0 °C to 70 °C operating range)
• Dedicated signals for module address, module reset
and host interrupt
• Two Wire Serial (TWS) interface with maskable inter-
rupt for expanded functionality including:
– Individual channel functions: disable, squelch
disable, lane polarity inversion, TX eye margin
enable
– A/D read back: module temperature and supply
voltages, per channel laser current and laser power,
or received power
– Status: per channel Tx fault, electrical (transmitter)
or optical (receiver) LOS, and alarm flags
– Programmable equalization integrated with DC
blocking caps at transmitter data input
– Programmable receiver output swing and de-
emphasis level
– Field-upgradable firmware capability
• 0 °C to 70 °C case temperature continuous operating
range. 85 °C supported for short durations
Avago Technologies Confidential – Restricted under NDA