AFBR-709ISMZ Datasheet, PDF (1/19 Pages) AVAGO TECHNOLOGIES LIMITED – SFP+ Transceiver

AFBR-709ISMZ
10Gb Ethernet, 850 nm, 10GBASE-SR/SW, SFP+ Transceiver
-40 °C to 85 °C
AFBR-709ISMZ
Data Sheet
Description
The Avago AFBR-709ISMZ transceiver is part of a family
of SFP+ products. This transceiver utilizes Avago’s 850 nm
VCSEL and PIN Detector technology to provide an IEEE
10 Gb Ethernet design compatible with the 10GBASE-SR
and 10GBASE-SW standards. The AFBR-709ISMZ trans-
ceiver is designed to enable 10 Gb Ethernet equipment
designs with very high port density based on the new
electrical and mechanical specification enhancements
to the well known SFP specifications developed by the
SFF Committee. These specifications are referred to as
SFP+ to recognize these enhancements to previous SFP
specifications used for lower speed products. Avago
Technologies is an active participant in the SFF Commit-
tee specification development activities.
Related Products
• The AFBR-709SMZ is an SFP+ 10 Gigabit Ethernet
10GBASE-SR/SW transceiver with case temperature
operated at 0 – 70 °C for use on multimode fiber
cables. It is best suited for OM3 high bandwidth MMF
link applications with link lengths up to 300 meters.
• AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LRM transceiver for 220 meter operation in all MMF
link applications including OM1 and OM2 legacy fiber
cables and new high bandwidth OM3 fiber cables.
• AFCT-709SM (AFCT-709ASM) with case temperature 0
– 70 (0 – 85) °C SFP+ 10 Gigabit Ethernet 10GBASE-LR
transceiver for operation in SMF link applications to
10 km
• AFCT-5016Z SFP+ Evaluation Board The purpose of
this SFP+ evaluation board is to provide the designer
with a convenient means for evaluating SFP+ fiber
optic transceivers.
Features
• Avago 850 nm VCSEL source and Transmitter Optical
Subassembly technology
• Avago PIN detector and Receiver Optical Subassembly
technology
• Typical power dissipation 600 mW
• Industrial case temperature -40 °C to 85 °C
• Full digital diagnostic management interface
• Avago SFP+ package design enables equipment EMI
performance in high port density applications with
margin to Class B limits
Specifications
• Optical interface specifications per IEEE 802.3ae
10GBASE-SR and 10GBASE-SW
• Link lengths at 10.3125 GBd:
300 m with 50 µm OM3 MM fiber
400 m with 50 µm OM4 MM fiber
• Electrical interface specifications per SFF Committee
SFF-8431 Specifications for Enhanced 8.5 and 10
Gigabit Small Form Factor Pluggable Module “SFP+”
• Management interface specifications per SFF
Committee SFF-8431 and SFF-8472 Diagnostic
Monitoring Interface for Optical Transceivers
• Mechanical specifications per SFF Committee SFF-
8432 Improved Pluggable Formfactor “IPF”
• LC Duplex optical connector interface confirming to
ANSI TIA/EA 604-10 (FOCIS 10A)
• Compliant to Restriction on Hazardous Substances
(RoHS) per EU and China requirements
• Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH
Patent - www.avagotech.com/patents