AFBR-708SMZ Datasheet, PDF (1/18 Pages) AVAGO TECHNOLOGIES LIMITED – 10Gb Ethernet, 850 nm, SFP+ USR, 100m on OM3 MMF Transceiver

AFBR-708SMZ
10Gb Ethernet, 850 nm, SFP+ USR,
100m on OM3 MMF Transceiver
Data Sheet
AFBR-708SMZ
Description
The Avago AFBR-708SMZ transceiver is part of a family
of SFP+ products. This transceiver utilizes Avago’s 850nm
VCSEL and PIN Detector technology to provide a trans-
ceiver to support 100m reach on OM3 MMF versus the
300m 10GBASE-SR standard. The AFBR-708SMZ trans-
ceiver is designed to enable 10Gb Ethernet equipment
designs with very high port density based on the new
electrical and mechanical specification enhancements
to the well known SFP specifications developed by the
SFF Committee. These specifications are referred to as
SFP+ to recognize these enhancements to previous SFP
specifications used for lower speed products. Avago
Technologies is a an active participant in the SFF Com-
mittee specification development activities.
Related Products
• AFBR-709SMZ, 10Gb Ethernet, 850 nm, 10GBASE-SR,
SFP+ Transceiver, 300m reach on OM3 MMF
• AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LRM transceiver for 220 meter operation in all MMF
link applications including OM1 and OM2 legacy fiber
cables and new high bandwidth OM3 fiber cables.
• AFCT-701SDZ SFP+ 10 Gigabit Ethernet 10GBASE-LR
transceiver for operation in SMF link applications to
10 km
• AFCT-5016Z SFP+ Evaluation Board The purpose of
this SFP+ evaluation board is to provide the designer
with a convenient means for evaluating SFP+ fiber
optic transceivers.
Features
• Avago 850nm VCSEL source and Transmitter Optical
Subassembly technology
• Avago PIN detector and Receiver Optical Subassembly
technology
• Typical power dissipation 600mW
• Full digital diagnostic management interface
• Avago SFP+ package design enables equipment EMI
performance in high port density applications with
margin to Class B limits
Specifications
• Optical interface specifications provide 100 m reach
on OM3 MMF when inter operating with other
10GBASE-SR or SFP+USR interfaces at the remote end
of the link.
• Electrical interface specifications per SFF Committee
SFF 8431 Specifications for Enhanced 8.5 and 10
Gigabit Small Form Factor Pluggable Module “SFP+”
• Management interface specifications per SFF
Committee SFF 8431 and SFF 8472 Diagnostic
Monitoring Interface for Optical Transceivers with
some adjustment.
• Mechanical specifications per SFF Committee SFF
8432 Improved Pluggable Formfactor “IPF”
• LC Duplex optical connector interface confirming to
ANSI TIA/EA 604-10 (FOCIS 10A)
• Compliant to Restriction on Hazardous Substances
(RoHS) per EU and China requirements
• Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH
Patent - www.avagotech.com/patents