AFBR-59E4APZ-HT Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Wave solder and aqueous wash process compatibility

AFBR-59E4APZ-HT
Multimode Small Form Factor (SFF) Transceiver
for Fast Ethernet, with LC Connector
Data Sheet
Description
The AFBR-59E4APZ-HT is a new power saving Small Form
Factor transceiver that gives the system designer a product to
implement a range of solutions for multimode fiber Fast
Ethernet.
This transceiver is supplied in the industry standard 2 × 5 DIP
style with an LC fiber connector interface.
Transmitter
The transmitter section of the AFBR-59E4APZ-HT transceiver
utilizes a 1310 nm LED. This LED is packaged in the optical
subassembly portion of the transmitter section. It is driven by
an integrated circuit that converts differential LVPECL logical
signals into an analog LED drive current.
Receiver
The receiver utilizes an InGaAs PIN photodiode coupled to a
trans-impedance pre-amplifier IC. It is packaged in the optical
subassembly of the receiver. The PIN/preamplifier combination
is connected to a quantizer IC, which provides the final pulse
shaping for data output. The data output is differential LVPECL.
The Signal Detect output is single-ended. Both Data and Signal
Detect outputs are LVPECL compatible.
Features
 Multisourced 2 × 5 package style
 Operates with 62.5/125 μm and 50/125 μm multimode
fiber
 Single +3.3 V power supply
 Wave solder and aqueous wash process compatibility
 Manufactured in an ISO 9001 certified facility
 Compatible with the optical performance requirements of
100Base-FX version of IEEE 802.3u
 RoHS compliant
 LVPECL Signal Detect Output
 Temperature range: –40 °C to +95 °C
Application
 Fast Ethernet
Avago Technologies
-1-