AFBR-5903Z Datasheet, PDF (1/16 Pages) AVAGO TECHNOLOGIES LIMITED – FDDI, Fast Ethernet Transceivers in 2 x 5 Package Style

AFBR-5903Z/5903EZ/5903AZ
FDDI, Fast Ethernet Transceivers
in 2 x 5 Package Style
Data Sheet
Description
The AFBR-5903Z family of trans­ceivers from Avago Tech-
nologies provide the system designer with products
to implement a range of FDDI and ATM (Asynchronous
Transfer Mode) designs at the 100 Mb/s-125 MBd rate.
The transceivers are all supplied in the new industry
standard 2 x 5 DIP style with a MT-RJ fiber connector
interface.
FDDI PMD, ATM and Fast Ethernet 2 km Backbone Links
The AFBR-5903Z is a 1300 nm product with optical per-
formance compliant with the FDDI PMD standard. The
FDDI PMD standard is ISO/IEC 9314‑3: 1990 and ANSI
X3.166 - 1990.
These transceivers for 2 km multimode fiber backbones
are supplied in the small 2 x 5 MT-RJ package style for
those designers who want to avoid the larger MIC/R
(Media Interface Connector/Receptacle) defined in the
FDDI PMD standard.
Avago Technologies also provides several other FDDI
products compliant with the PMD and SM-PMD standards.
These products are available with MIC/R, ST^©, SC and FC
connector styles. They are available in the 1 x 9, 1 x 13 and
2 x 11 transceiver and 16 pin transmitter/receiver pack-
age styles for those designs that require these alternate
configurations.
The AFBR-5903Z is also useful for both ATM 100 Mb/s
interfaces and Fast Ethernet 100 Base-FX interfaces. The
ATM Forum User-Network Interface (UNI) Standard, Version
3.0, defines the Physical Layer for 100 Mb/s Multimode
Fiber Interface for ATM in Section 2.3 to be the FDDI PMD
Standard. Likewise, the Fast Ethernet Alliance defines the
Physical Layer for 100 Base-FX for Fast Ethernet to be the
FDDI PMD Standard.
ATM applications for physical layers other than 100
Mb/s Multimode Fiber Interface are supported by
Avago Technologies. Products are available for both
the single-mode and the multi­mode fiber SONET OC-3c
(STS‑3c), SDH (STM-1) ATM interfaces and the 155 Mb/s-
194 MBd multi­mode fiber ATM interface as specified
in the ATM Forum UNI.
Features
• Multisourced 2 x 5 package style with MT-RJ
receptacle
• Single +3.3 V power supply
• Wave solder and aqueous wash process compatible
• Full compliance with the optical performance
requirements of the FDDI PMD standard
• Full compliance with the FDDI LCF-PMD standard
• Full compliance with the optical performance
requirements of the ATM 100 Mb/s physical layer
• Full compliance with the optical performance
requirements of 100  Base‑FX version of IEEE 802.3u
• “RoHS” compliance
• Receiver output squelch function enabled
Applications
• Multimode fiber backbone links
• Multimode fiber wiring closet to desktop links
Ordering Information
The AFBR-5903Z 1300 nm product is avail­able for pro-
duction orders through the Avago Technologies Com-
ponent Field Sales Offices and Auth­orized Distributors
world wide.
AFBR-5903Z =
AFBR-5903EZ =
AFBR-5903AZ =
0°C to +70°C
No Shield
0°C to +70°C
Extended Shield
-40°C to +85°C
No Shield.
Contact your Avago Technologies sales representa-
tive for infor­ma­tion on these alternative FDDI and ATM
products.