AFBR-57F5PZ Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – Low Voltage (3.3V) Fibre Channel Optical Transceiver

AFBR-57F5PZ
16GFC SFP+ Digital Diagnostic SFP, 850nm, 16G/8G/4G
Low Voltage (3.3V) Fibre Channel Optical Transceiver
Data Sheet
Description
Avago Technologies’AFBR-57F5PZ optical transceiver sup-
ports high speed serial links over multi-mode optical fiber
at signalling rates up to 14.025Gb/s (the serial line rate of
16GFC). The product is compliant with Small Form Plug-
gable industry agreements SFP and SFP+ for mechanical
and low speed electrical specifications. High speed elec-
trical and optical specifications are compliant with ANSI
Fibre Channel FC-PI-5.
The AFBR-57F5PZ is a multi-rate 850nm transceiver which
ensures compliance with FC-PI-5 16GFC, 8GFC and 4GFC
specifications. Per the requirements of 16GFC, internal
clock and data recovery circuits (CDRs) are present on
both electrical input and electrical output of this trans-
ceiver. These CDRs will lock at 14.025Gb/s (16GFC) but
must be bypassed for operation at 8.5Gb/s (8GFC) and
4.25Gb/s (4GFC), accomplished by using two Rate Select
inputs to configure transmit and receive sides. Transmitter
and receiver can operate at different data rates, as is often
seen during Fibre Channel speed negotiation.
Digital diagnostic monitoring information (DMI) is pres-
ent in the AFBR-57F5PZ per the requirements of SFF-8472,
providing real time monitoring information of transceiver
laser, receiver and environment conditions over a SFF-
8431 2-wire serial interface.
Related Products
• AFBR-57D7APZ: 850nm SFP for 8G/4G/2G Fibre Channel
• AFCT-57D5ATPZ: 1310nm SFP for 8G/4G/2G Fibre Channel
• AFCT-57D5ANPZ: 1310nm SFP for 8G/4G/2G Fibre Channel
• AFBR-57R5APZ: 850nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5APZ: 1310nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5ATPZ: 1310nm SFP for 4G/2G/1G Fibre Channel
• AFCT-57R5ANPZ: 1310nm SFP for 4G/2G/1G Fibre Channel
Features
•  Compliant to RoHS directives
•  850nm Vertical Cavity Surface Emitting Laser (VCSEL)
•  Class 1 eye safe per IEC60825-1 and CDRH
•  Wide temperature range (0°C to 70°C)
•  LC duplex connector optical interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10A)
•  Diagnostic features per SFF-8472 “Diagnostic Monitor-
ing Interface for Optical Transceivers”
•  Enhanced operational features including EWRAP,
OWRAP and variable electrical EQ/emphasis settings
•  Real time monitoring of:
-  Transmitter average optical power
-  Received average optical power
-  Laser bias current
- Temperature
-  Supply Voltage
•  SFP+ mechanical specifications per SFF-8432
•  SFP+ compliant low speed interface
•  Fibre Channel FC-PI-5 compliant high speed interface
-  1600-SN-M6-S, 800-SN-M6-S, 400-SN-M6-I
-  1600-SN-M5-S, 800-SN-M5-S, 400-SN-M5-I
-  1600-SN-M5E-I, 800-SN-M5E-I, 400-SN-M5E-I
-  1600-SN-M5F-I, 800-SN-M5F-I, 400-SN-M5F-I
•  Fibre Channel FC-PI-5 compliant optical link distances
Applications
•  Fibre Channel switches (director, stand alone, blade)
•  Fibre Channel Host Bus Adapters
•  Fibre Channel RAID controllers
•  Fibre Channel tape drive
•  Port side connections
•  Inter-switch or inter-chassis aggregated links
Patent - www.avagotech.com/patents