AFBR-5205Z Datasheet, PDF (1/19 Pages) AVAGO TECHNOLOGIES LIMITED – Multimode fi ber ATM backbone links

AFBR-5205Z
ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1
in Low Cost 1x9 Package Style
Data Sheet
Description
The AFBR-5200Z family of transceivers from Avago Tech-
nologies provide the system designer with products
to implement a range of solutions for multimode fiber
SONET OC-3 (SDH STM-1) physical layers for ATM and
other services.
These transceivers are all supplied in the new industry
standard 1x9 SIP package style with either a duplex SC or
a duplex ST* connector interface.
ATM 2000 m Backbone Links
The AFBR-5205Z/-5205TZ are 1300 nm products with
optical performance compliant with the SONET STS-3c
(OC-3) Physical Layer Interface Specification. This physical
layer is defined in the ATM Forum User-Network Interface
(UNI) Specification Version 3.0. This document references
the ANSI T1E1.2 specification for the details of the interface
for 2000 meter multimode fiber backbone links.
Selected versions of these transceivers may be used to
implement the ATM Forum UNI Physical Layer Interface at
the 155 Mbps/194 MBd rate.
The ATM 100 Mbps/125 MBd Physical Layer interface is
best implemented with the AFBR-5100Z family of FDDI
Transceivers which are specified for use in this 4B/5B
encoded physical layer per the FDDI PMD standard.
Features
 Full compliance with ATM Forum UNI SONET OC-3
Multimode Fiber Physical Layer Specification
 Multisourced 1x9 package style with choice of duplex
SC or duplex ST* receptacle
 Wave solder and aqueous wash process compatibility
 RoHS Compliance
Applications
 Multimode fiber ATM backbone links
 Multimode fiber ATM wiring closet to desktop links
 ATM 155 Mbps/194 MBd encoded links (available upon
special request)
Part Numbers
AFBR-5205Z, AFBR-5205AZ, AFBR-5205APZ,
AFBR-5205ATZ, AFBR-5205PZ, AFBR-5205TZ,
AFBR-5205PEZ 1300 nm 2 km
Transmitter Sections
The transmitter sections of the AFBR-5205Z series utilize
1300 nm InGaAsP LEDs. These LEDs are packaged in the
optical subassembly portion of the transmitter section.
They are driven by a custom silicon IC which converts
differential PECL logic signals, ECL referenced (shifted) to a
+5 Volt supply, into an analog LED drive current.
*ST is a registered trademark of AT&T Lightguide Cable Connectors.