|
AFBR-5103Z Datasheet, PDF (1/20 Pages) AVAGO TECHNOLOGIES LIMITED – FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style | |||
|
AFBR-5103Z, AFBR-5103TZ, AFBR-5103AZ, AFBR-5103ATZ,
AFBR-5103PZ and AFBR-5103PEZ
FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers
in Low Cost 1x9 Package Style
Data Sheet
Description
The AFBR-5100Z family of transceivers from Avago Tech-
nologies provide the system designer with products to
implement a range of FDDI and ATM (Asynchronous
Transfer Mode) designs at the 100 Mbps/125 MBd rate.
The transceivers are all supplied in the new industry stan-
dard 1x9 SIP package style with either a duplex SC or a
duplex ST* connector interface.
FDDI PMD, ATM and Fast Ethernet 2000 m Backbone
Links
The AFBR-5103Z/-5103TZare 1300 nm products with
optical performance compliant with the FDDI PMD
standard. The FDDI PMD standard is ISO/IEC 9314-3:
1990 and ANSI X3.166 - 1990.
These transceivers for 2000 meter multimode fiber
backbones are supplied in the small 1x9 duplex SC or
ST package style for those designers who want to avoid
the larger MIC/R (Media Interface Connector/Receptacle)
defined in the FDDI PMD standard.
Avago Technologies also provides several other FDDI
products compliant with the PMD and SM-PMD stan-
dards. These products are available with MIC/R, ST© and
FC connector styles. They are available in the 1x13 and
2x11 transceiver and 16 pin transmitter/receiver package
styles for those designs that require these alternate con-
figurations.
Features
ï· Full Compliance with the Optical Performance Require-
ments of the FDDI PMD Standard
ï· Full Compliance with the FDDI LCF-PMD Standard
ï· Full Compliance with the Optical Performance Require-
ments of the ATM 100 Mbps Physical Layer
ï· Full Compliance with the Optical Performance Require-
ments of 100 Base-FX Version of IEEE 802.3u
ï· Multisourced 1x9 Package Style with Choice of Duplex
SC or Duplex ST* Receptacle
ï· Wave Solder and Aqueous Wash Process Compatible
ï· RoHS Compliance
Applications
ï· Multimode Fiber Backbone Links
ï· Multimode Fiber Wiring Closet to Desktop Links
ï· Multimode Fiber Media Converter
Note: The âTâ in the product numbers indicates a transceiver with a
duplex ST connector receptacle. Product numbers without a âTâ indicate
transceivers with a duplex SC connector receptacle.
The AFBR-5103Z/-5103TZ is also useful for both ATM 100
Mbps interfaces and Fast Ethernet 100 Base-FX inter-
faces. The ATM Forum User-Network Interface (UNI) Stan-
dard, Version 3.0, defines the Physical Layer for 100 Mbps
Multimode Fiber Interface for ATM in Section 2.3 to be
the FDDI PMD Standard. Likewise, the Fast Ethernet Al-
liance defines the Physical Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD Standard.
*ST is a registered trademark of AT&T Lightguide Cable Connectors.
|
▷ |