|
AEIC-2631-S16 Datasheet, PDF (1/3 Pages) AVAGO TECHNOLOGIES LIMITED – Quad Diff erential Line Driver | |||
|
AEIC-2631-S16
Quad Differential Line Driver*
Data Sheet
Description
These line drivers are similar to the popular 26LS31 device,
but without the enable function. They provide the addi-
tional supply voltage range necessary for use in many
industrial control applications. AEIC-2631-S16 not only
supports RS-422A, but use of supplies up to 30 V. Output
voltage swings up to VCC -2 V are typical. The outputs are
protected against shorts to ground by a two-fold scheme
of current limiting and thermal shutdown.
Thermal shutdown is accomplished by monitoring
junction temperature and comparing this to a band gap
reference on chip. Input hysteresis of about 0.5 V provides
good noise margin, even in noisy industrial control envi-
ronments. Input to output propagation delays of less than
200 ns are typical for rising and falling edges of the input
waveform, measured to the zero crossing of the differen-
tial outputs.
This part is available in 16L SOIC (Pb-free) package.
Applications
ï·ï Encoders
ï·ï Industrial controls
Features
ï·ï Supply Voltage Range 4.75 V to 30 V
ï·ï Operation to 800 KHz
ï·ï CMOS and TTL Compatible Inputs
ï·ï Support RS422A
ï·ï High Impedance Buffered Inputs with hysteresis
ï·ï Outputs short circuit protected
ï·ï 70 mA peak SINK current
ï·ï Outputs Protected by Thermal Shut-Down
Pin Assignment
AIN 1
A+ 2
A- 3
NC 4
B- 5
16 VCC
15 DIN
14 D+
13 D-
12 NC
B+ 6
11 C-
BIN 7
10 C+
GND 8
9 CIN
* Pin compatible with 26LS31 in applications which do not require an enable function.
|
▷ |