ADJD-E622-QR999 Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – RGB Color Sensor in QFN Package

ADJD-E622-QR999
RGB Color Sensor in QFN Package
Data Sheet
Description
ADJD-E622-QR999 is a high performance, small in size,
cost effective light to voltage converting sensor. The
sensor combines a photodiode array and three trans-
impedance amplifiers in a single monolithic CMOS IC
solution. With a Red (R), Green (G) and Blue (B) color
filters coated over the photodiode array, the sensor
converts RGB light to analog voltage outputs, denoted
by VROUT, VGOUT and VBOUT, respectively. The sensor
is packaged in a 5x5x0.75 [mm] surface mount QFN-16
package.
Applications
• Ideal choice of light sensor in automotive
applications such as dashboard lighting, automotive
interior lighting, infotainment and navigational
panel.
• Other potential applications are such as
environmental lighting, cabin lighting, decorative
lighting, general color detection, industrial process,
etc.
• Can also be coupled with Avago Technologies’
patented color controller, HDJD-J822, to form a
closed loop color management system
Features
• Convert light to R,G,B voltage output
• Monolithic CMOS IC solution comprises of an array
of photodiode coated with R,G, B color filter and
integrated with transimpedance amplifier.
• Independent gain selection options for each R,G,B
channel
• 3 sets of 3x3 photodiode array design to minimize
the effect of contamination and optical aperture
misalignment
• Qualified per Automotive AEC-Q100 Standard
(Grade 3)
• Rοbust package and small in size 5x 5x 0.75 mm
ESD WARNING: Standard CMOS handling precautions should be observed to avoid static discharge.
THIS PRODUCT IS NOT CERTIFIED OR WARRANTIED FOR AUTOMOTIVE APPLICATIONS. IF THE CUSTOMER
INTENDS TO USE IT FOR AUTOMOTIVE APPLICATIONS, THEY DO SO AT THEIR OWN RISK. AVAGO WILL NOT
BE RESPONSIBLE FOR ANY CLAIM OF PRODUCT FAILURE DURING OPERATION OR RELIABILITY ASSESSMENT.