|
ACPL-W60L-000E Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – High Speed LVTTL Compatible 3.3 Volt Optocouplers | |||
|
ACPL-W60L/K63L
High Speed LVTTL Compatible
3.3 Volt Optocouplers
Data Sheet
Description
Features
The ACPL-W60L/K63L are optically coupled gates
that combine a GaAsP light emitting diode and an
integrated high gain photo detector. The output of the
detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed
common mode transient immunity specification of 15
kV/µs.
⢠Package clearance/creepage at 8 mm
⢠Low power consumption
⢠15 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 50 V
⢠High speed: 15 MBd typical
⢠LVTTL/LVCMOS compatible
This unique design provides maximum AC and DC
circuit isolation while achieving L V T T L / L V C M O S
compatibility. The optocoupler AC and DC operational
parameters are guaranteed from â40ËC to +85ËC
allowing trouble-free system performance.
⢠Low input current capability: 5 mA
⢠Guaranteed AC and DC performance over temperature:
â40ËC to +85ËC
⢠Available in 6-pin stretched SO-6 and 8 pin stretched
SO-8
Applications
⢠Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-2 â
in process
⢠Isolated line receiver
⢠Computer-peripheral interfaces
⢠Microprocessor system interfaces
⢠Digital isolation for A/D, D/A conversion
⢠Switching power supply
Functional Diagram
⢠Instrument input/output isolation
⢠Ground loop elimination
⢠Pulse transformer replacement
⢠Fieldbus
ACPL-W60L
ANODE 1
2
CATHODE 3
6 VCC
5 VO
SHIELD
4 GND
ACPL-K63L *
ANODE 1 1
8 VCC
CATHODE 1 2
7 VO1
CATHODE 2 3
6 VO2
ANODE 2 4
SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
OUTPUT
L
H
*Advanced Information
A 0.1 µF bypass capacitor must be
connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent
damage and/or degradation which may be induced by ESD.
|
▷ |